Technical information Spot Blender

Technical information Spot Blender

ColorMatic spot blender is universally applicable for spot blending of 1K and 2K clear coats as well as for 1K and 2K topcoats. It is specially formulated to ensure the overspray will blend into the transition zone, leaving no visible difference between the old and new paintwork. This reduces the need to polish.

Apply ColorMatic 2K Hi-Speed Clear Coats or 2K topcoats to the blended area, immediately after application.

Application:
Ideal for spot repairs.

 

Quality and properties

  • Essential for spot coating
  • Additional coating to 1K and 2K, and 1K and 2K clear coats and topcoats
  • Simple time-saving processing
  • Dissolves well
  • Easy to polish
  • Significantly reduces the need to polish
  • Blends in seamlessly edge areas

Physical and chemical data

  • Basis of binder: Special resin
  • Colour: transparent
  • Smell: solvent
  • Temperature resistance: to 90°C
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    Aerosol cans, maximum nominal volume 400 ml
  • VOC-value: 283,8g

 

Environment and labelling

Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. 

Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

  • Apply ColorMatic 2K hi-speed clear coat or top coat to the blended immediately after application
  • First prepare a matt underlayer in the transition zone with P2000-P4000 abrasive pads.

  • For professional use only
  • Wear an appropriate respirator (recommended type A2/P3)

 

Hints concerning application

For best results, we recommend the application of ColorMatic blender clear approx. 10 cm inside and outside the edge areas.

Technical information Spot Blender
2 min
Technical information Spot Blender
thin coats:
2-3
Technical information Spot Blender
 

Order information

 Color   Product   Bundle   Art.No. 
 CM 1K Beispritzlack 400   400 ml   114229 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical information Spot Blender
Technical information Spot Blender

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

As of August 9, 2010
This release replaces all eventually earlier issued versions.

News

In November 2021, we launched our new name, European Aerosols. With our new name, we wanted to express our established position and ambition for the...

Read more

Ideas

Here you can make stylized leaf-pattern wall paintings. The trick: the leaves are not painted but sprayed with stencil technology. The brilliant white...

Read more

Scratches can be quickly repaired with presto light filler without affecting the weight of the board.

 

Also suitable for use on:

Model planes,...

Read more