Technical information 1K Filler

Technical information 1K Filler

ColorMatic 1K filler is an advanced 1K acrylic filler with excellent filling properties and coverage. It is highly suitable for levelling superficial scratches and minor irregularities in sanded surfaces. It offers excellent adhesion on polyester filler, plastics and metal. It has a very good flow, is wet-on-wet re-sprayable and easy to sand.

Application:
Ideal for spot repair and refinishing of parts.

Quality and properties

  • Advanced 1K acrylic filler with excellent filling properties and coverage
  • Wet-on-wet application possible
  • Very good for filling minor scratches and uneven areas on sanded undercoats
  • Good adhesion to all metal surfaces
  • Very smooth flow

Physical and chemical data

  • Basis of binder: Acrylic resin
  • Colour: beige (856556), grey (874987)
  • Smell: Solvent
  • Efficiency:
    400ml are sufficient for approx. 1,25 - 1,75 m²
  • Substrate:
    blank metall, sanded, priming of spare parts, sanded, cured paintings, sanded, polyester substrates, sanded, steel, sanded and aluminium, sanded
  • Drying time (at 20°C, 50% relative air humidity):
    Dust dry: 5 min
    Dry to touch: 15-20 min
    Coatable (wet-on-wet): 15-20 min
    Hard dry: 60 min
  • Temperature resistance: to110°C
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    Aerosol cans, maximum nominal volume 400 ml
  • VOC-value: 217g

Environment and labelling

Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. 

Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

  • Remove all rust from damaged areas, where appropriate
  • Clean surface thoroughly and sand
  • Damaged area must be dry and free of grease and dust
  • Shake the can well for 2 minutes
  • Carry our spray test
  • Clean undercoat with ColorMatic Silicone Remover, art. no. 174 469
  • Large bare areas should be pre-treated with the appropriate ColorMatic primers
  • Do not overcoat with polyester products
  • For professional use only
  • Use an adequate respirator mask (we recommend type A2/P3)
Technical information 1K Filler
2 min
Technical information 1K Filler
3=30-60µ
Technical information 1K Filler
5 min
Technical information 1K Filler
8-10 min
Technical information 1K Filler
20°C=60 min
Technical information 1K Filler
P800-1000
Technical information 1K Filler
P400-500
Technical information 1K Filler
variable
Technical information 1K Filler
 
 
 
 

Order information:

 Color   Product   Bundle   Art.No. 
 CM 1K Füller beige 400   400 ml   856556 
 CM Füller grau 400   400 ml   874987 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical information 1K Filler
Technical information 1K Filler

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

As of August 25, 2017
This release replaces all eventually earlier issued versions.

News

In November 2021, we launched our new name, European Aerosols. With our new name, we wanted to express our established position and ambition for the...

Read more

Ideas

The ideal and inexpensive way to repair high-strength and heat-resistant metal links with presto adhesive steel.

 

Also suitable for use on: ...

Read more

Tischdekoration für Ostern

Tischdekoration für Ostern

Brauchen Sie noch eine außergewöhnliche Tischdeko für Ostern? Schnell gemacht und garantiert einzigartig sind unsere Eierbecher aus Schnellzement und...

Read more