Technical Information Aerosol-Art

Technical Information Aerosol-Art

For numerous application possibilities. Special spray system, which is even used by famous graffiti artists. A broad range of the best-selling colours, mainly matching to RAL. Also available as clear coat.

Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles. Also applicable for the designing of finery, concrete and natural stone.

Quality and properties

  • High-grade nitro-combi quality
  • Very good coverage
  • Excellent adhesion on many surfaces
  • Good flow, smooth surface
  • Quick-drying
  • Suitable for indoors and outdoors applications
  • Polishable surface
  • Weather-resistant, light-proof, UV-resistant
  • Scratch-, shock- and impact-resistant

Physical and chemical data

  • Basis of the binder: nitro-combi
  • Colour: diverse
  • Smell: solvent
  • Degree of gloss (at measurement angle 60° acc. to DIN 67530):
    glossy: 80 gloss units
    satin matt: 30-35 gloss units
    matt: 5-10 gloss units
  • Efficiency:
    Depending on consistence and color of the ground:
    400 ml are sufficient for approx. 0.8-1.5 m² depending on colour
  • Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 10 minutes
    Non-sticky: after approx. 15 minutes
    Dry to touch: after approx. 30 minutes
    Cured: after approx. 2 hours
    Can be polished after approx. 24 hours
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature-resistant: up to 80°C
  • Storage stability:
    10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size: aerosol cans, maximum nominal volume 400 ml

Environment and labelling

Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. 

Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

  • The surface has to be clean, dry and free from fat.
  • Remove residues of old paintings and rust, then sand and prime if necessary. Let dry for 1 - 2 hours.
  • Use DUPLI-COLOR Pastic Primer on plastic parts.
  • Cover areas not to be painted.
  • Before use, shake the can for 3 minutes.
  • Test spray at an invisible spot to check colour-matching and compatibility of the lacquer.
  • Spray from a distance of approx. 25 cm several thin coats.
  • Do not spray over synthetic paints!

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order informations

 Color   Product   Bundle   Art.No. 
 Aerosol Art pastellblau gl.400   400 ml   733239 
 Aerosol Art RAL 1001 gl. 400   400 ml   732584 
 Aerosol Art RAL 1001 matt 400   400 ml   466588 
 Aerosol Art RAL 1001 sdm. 400   400 ml   466595 
 Aerosol Art RAL 1002 gl. 400   400 ml   740978 
 Aerosol Art RAL 1002 matt 400   400 ml   466601 
 Aerosol Art RAL 1002 sdm. 400   400 ml   466618 
 Aerosol Art RAL 1003 sdm. 400   400 ml   666216 
 Aerosol Art RAL 1004 gl. 400   400 ml   722479 
 Aerosol Art RAL 1006 gl. 400   400 ml   732898 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Aerosol-Art
Technical Information Aerosol-Art

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

As of September 27, 2012
This release replaces all eventually earlier issued versions.

News

In November 2021, we launched our new name, European Aerosols. With our new name, we wanted to express our established position and ambition for the...

Read more

Ideas

Unsightly dents on wings or bumpers can be easily and conveniently removed with MoTip Spray Paints.

Read more

Porous material and holes up to 1 cm wide can easily be bridged or repaired in broken plastic using presto extra Fibreglass Filler.

 

Also suitable...

Read more