Technical Information ColorSpray Colours

Technical Information ColorSpray Colours

High gloss and satin matt colours, excellently suitable for all DIY and handicraft works on wood, metal, aluminium, glass, stone, carton, paper, eternite, china and many paintable plastics. For indoor and outdoor applications.

Quality and properties

  • High-grade synthetic quality
  • Quick-drying
  • Suitable to paint and repair indoor and outdoor objects
  • Good coverage and filling power
  • Good colour and gloss retention
  • Weather resistant, light-proof, UV-resistant
  • Excellent flow for even surfaces
  • Good adherence on nearly all materials
  • Scratch-, bump and shock-proof
  • Temporarily resistant against fuel, chemicals and weather influences

Physical and chemical data

  • Basis of the binder: Alkyd resin
  • Colour: specific
  • Smell: solvent
  • Degree of gloss (at measurement angle 60° acc. to DIN 67530):
    glossy: 85-90 gloss units
    satin matt: 30-35 gloss units
  • Efficiency:
    Depending on consistence and color of the ground:
    400 ml are sufficient for approx. 0.8 - 1.2 m²
    depending on colour
  • Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 30 minutes
    Non-sticky: after approx. 4 hours
    Cured: after approx. 24 hours
    Coatable: within 2 hours or after approx. 24 hours
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature-resistant: up to 80°C
  • Storage stability:
    Aerosols: 10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size: aerosol cans, maximum nominal volume 400 ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Instruction manuel

The most MoTip spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Preparation of the ground:

  • The ground has to be clean, dry and free from fat.
  • Remove residues of old paintings and rust, then sand and prime.
  • Plastic Parts have to be primed with MoTip Plastic Primer.
  • Let dry for 1 - 2 hours.



  • The ground has to be clean, dry and free from fat.
  • Bring the can to room temperature.
  • Processing temperature during 15 - 25°C.
  • Mask off the areas which are not to be painted.
  • Before use, shake the can for 2 minutes.
  • Test compatibility of the spray at an invisible spot.
  • Spray from a distance of approx. 25 cm.
  • Spray several thin coats in 2 minute intervals.
  • Shake the can during use from time to time.
  • After use, turn the can upside down and spray to clean the valve.
  • Do not overpaint with acrylic or nitro combi paints - not even after curing!

Tips for spray painting

Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

The aerosol can should have room temperature.

Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!


Order informations

 Color   Product   Bundle   Art.No. 
 Colorworks Black 400   400 ml   918515 
 Colorworks Bordeaux Red 400   400 ml   918519 
 Colorworks Carmine Red 400   400 ml   918506 
 Colorworks Chocolat Brown 400   400 ml   918514 
 Colorworks Enzian Blue 400   400 ml   918509 
 Colorworks Fire Red 400   400 ml   918505 
 Colorworks Forest Green 400   400 ml   918512 
 Colorworks Gold 400   400 ml   918518 
 Colorworks Gold Yellow 400   400 ml   918501 
 Colorworks Ivory White 400   400 ml   918502 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information ColorSpray Colours
Technical Information ColorSpray Colours

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of: August 12, 2013
This release replaces all eventually earlier issued versions.


Last July the 30th we celebrated the opening of the new production line at Motip Dupli Wolvega. This investment results in a production capacity...

Read more


Kreative Ostereier

Rost, Crackle oder Marble? Wir sprühen für Ostern! Wie jedes Jahr zum Osterfest wollen wir mit Eiern dekorieren. Diesmal wird mit den...

Read more

Tischdeko und passendes Outfit

Dosen, Plastikbecher und Dekoteilchen werden für das nächste Spiel mit den Nationalfarben Schwarz, Rot und Gelb aus der Serie platinum von DUPLI-COLOR...

Read more