Technical Information Inox Spray

Technical Information Inox Spray

DUPLI-COLOR Inox Look is a reliable corrosion protection as well as a surface coating. Seals weld spots and weld seams. Also applicable as corrosion protection during spot-welding between car body sheets. Paintable with all common paint systems, e.g. acrylic, synthetic, epoxy resin or nitro-combi laquers.

Quality and properties

  • High-grade nitro-combi quality with metallic pigments
  • Excellent coverage
  • Quick-drying
  • Good flow, smooth surface
  • Very hard surface
  • Excellent resistance to weathering
  • Light-proof, UV-resistant
  • Re-coatable

    Physical and chemical data

    • Basis of the binder: nitro-combi
    • Colour: stainless steel silver
    • Smell: solvent
    • Degree of gloss (at measurement angle 60° acc. to DIN 67530):
      not measurable (metallic
    • Efficiency:
      Depending on consistence and color of the ground:
      400 ml are sufficient for approx. 0.8-1.0 m² depending on colour
    • Drying time (at 20°C, 50% relative air humidity):
      Dust-dry: after approx. 5 minutes
      Dry to touch: after approx. 20 minutes
      Dry: after approx. 2 hours
      The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
    • Temperature-resistant: up to 80°C
    • Storage stability:
      10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
    • Size: aerosol cans, maximum nominal volume 400 ml

    Environment and labelling

    Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

    Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 
    Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. 

    Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

    Using instructions

    The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
    Before use, carefully read and observe the warning texts on the label!

    Application


    Preparation of the ground:

    • If necessary, egalize uneven surfaces (fill, sand, prime)
    • The surface has to be clean, dry and free from fat.

    Lacquering:

    • Cover areas not to be painted.
    • Before use, shake the can for 2-3 minutes.
    • Test spray at an invisible spot to check colour-matching and compatibility of the lacquer.
    • Spray from a distance of approx. 25 cm several thin coats.
    • Do not spray over synthetic paints!

    Tips for spray painting

    Protect the object and the surrounding area from spray mist.
    Temperature should range between +10°C and +25°C, max. air humidity 60 %.

    Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

     

    Order informations

    printing preview/further products

    * no color identification possible
    The presentation of colors may deviate from the original color.
    For printing of the order information please press "printing preview/further products".

    There are no prdocuts to show.

    Examples for use

    Technical Information Inox Spray
    Technical Information Inox Spray

    Disclaimer of liability

    This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

    As of May 6, 2016
    This release replaces all eventually earlier issued versions.

    News

    In November 2021, we launched our new name, European Aerosols. With our new name, we wanted to express our established position and ambition for the...

    Read more

    Ideas

    Aging, weather influences and other conditions can make that the plastic of headlamps by and by will be matt and unclear. Only with a little effort...

    Read more

    Kinderbett

    Kinderbett

    Nostalgisch verschnörkelte Gitterbettchen lassen die Herzen aller Mamas höher schlagen, denn sie sehen im Kinderzimmer einfach süß aus. Mit einem...

    Read more