Technical Information Gasket Remover Spray for the fast and easy removal of dried adhesives and seals, as well as hardened sealing material from car and machine parts. Gasket remover has high dissolving properties and is non-conductive and non-corrosive. In view of the high viscosity, gasket remover has optimum effect. MoTip Gasket Remover is user-friendly and has a directed jetspray. For use on: Metal, wood, ceramic, glass, polyethylenes and polypropylenes Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties User-friendly High dissolving properties Optimum effect in view of high viscosity Non-conductive Slight gel structure Non-corrosive Directed jetspray Electro engines Physical and chemical data Basis: Dimethoxymethan VOC-content: approximately 95% w/w Colour : transparent Smell : Ether Relative density at 20°C : 0,75 g/ml Yield : 1,0 - 1,5 g/sec. Vapour pressure at 20°C : 2 - 3 bar pH-value: neutral Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol can, maximum nominal volume 500 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Instruction manuel Before use, carefully read and observe the warning texts on the label! Application: Bring can to room temperature. Operating temperature 5° to 30°C. Shake can for 2 minutes before use. Cover coated or plastic parts. Spray the residue to be removed from a distance of ca. 25-30 cm and leave to work for 10 minutes. Carefully remove loosened residue with a spatula. Repeat process on stubborn dirt. Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: November 2, 2011 This release replaces all eventually earlier issued versions.
Technical Information Tar Spray Lubricant and preservative on basis of Stockholm tar to prevent wear and sticking of screwed connections which are liable to heavy workload. Tar Spray gives lasting protection, is water-repellent and resistant to weather influences and weak acids and bases. MoTip Tar Spray has excellent adhesion and excellent corrosion prevention. Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties Lasting protection Water-repellent Excellent adhesion Prevents wear and sticking Resistant to weather influences Resistant to weak acids and bases Excellent corrision prevention Directed jetspray 360° Valve Physical and chemical data Basis: Stockholm Tar VOC-content: approximately 75% w/w Colour : transparent brown Smell : characteristic Relative density at 20°C : 0.76 g/ml Yield: 1 - 1,5 g/sec Temperature resistant: -30 to + 180 °C Vapour pressure at 20°C : 3 - 4 bar Size: aerosol can, maximum nominal volume 500 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Instruction manuel Before use, carefully read and observe the warning texts on the label! Application: Bring can to room temperature. Operating temperature 5° to 30° C. Shake for 2 minutes before use. Spray parts to be treated prior to assembly. After evaporation a protective film remains, which simplifies the futur disassembly. The protective film can be removed with MoTip Industrial Cleaner. Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 01, 2014 This release replaces all eventually earlier issued versions.
Technical Information Shock Oil Effective tool to loosen rusted parts. As a result of the fierce decrease in temperature to –30°C and the lubricating properties of shock oil, the screwed connection can be loosed. MoTip Shock Oil has excellent lubricating properties and a directed jetspray. Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties Very effective Directed jetspray Briefly decreases the temperatur to -30°C Excellent lubricating properties Physical and chemical data Basis : Aliphatic Hydrocarbons VOC-content: approximately 95% w/w Colour : brownish-transparent Smell : Vanilla Relative density at 20°C : 0.65 g/ml Yield : 1.92 g/sec. Vapour pressure at 20°C : 3 - 4 bar Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol can, maximum nominal volume 500 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Instruction manuel Before use, carefully read and observe the warning texts on the label! Application: Bring can to room temperature. Operating temperature 5° to 30°C. Shake can before use. Spray the screws with several short sprays for several seconds. The fast temperature drop in combination with the lubrication means screws can be loosened. Do not spray on skin or body parts! Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 1, 2014 This release replaces all eventually earlier issued versions.
Order informations Gasket Remover Spray for the fast and easy removal of dried adhesives and seals, as well as hardened sealing material from car and machine parts. Gasket remover has high dissolving properties and is non-conductive and non-corrosive. In view of the high viscosity, gasket remover has optimum effect. MoTip Gasket Remover is user-friendly and has a directed jetspray. For use on: Metal, wood, ceramic, glass, polyethylenes and polypropylenes Order informations There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: November 2, 2011 This release replaces all eventually earlier issued versions. back
Order informations Assembly Grease Metal free grease with high thermal stability to prevent clenching of brake systems. Brake assembly grease is resistant to chemicals, weather influences, water, salt and weak acids and bases. Brake assembly grease has excellent adhesion and a directed jetspray. MoTip Brake Assembly Grease is extremely suitable to mount brake systems and simplifies the future removal. Order informations There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: November 2, 2011 This release replaces all eventually earlier issued versions. back
Assembly Grease Metal free grease with high thermal stability to prevent clenching of brake systems. Brake assembly grease is resistant to chemicals, weather influences, water, salt and weak acids and bases. Brake assembly grease has excellent adhesion and a directed jetspray. MoTip Brake Assembly Grease is extremely suitable to mount brake systems and simplifies the future removal. Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use
Tar Spray Lubricant and preservative on basis of Stockholm tar to prevent wear and sticking of screwed connections which are liable to heavy workload. Tar Spray gives lasting protection, is water-repellent and resistant to weather influences and weak acids and bases. MoTip Tar Spray has excellent adhesion and excellent corrosion prevention. Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use
Technical Information Leak Detector Spray to trace leakages in gas pipes. Leak detector is non-flammable and non-corrosive. Leak detector can be removed with water and is environmental friendly. Leak detector is slightly foaming and slightly basic. MoTip Leak Detector is DVGW certified, number NG/5170BR0105. For use on: Pipes, hoses, tyres, tanks, compressors, pressure switch, compressed air bottles, refrigerant circuits and systems with combustible gases. Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties DVGW certified, number NG/5170BR0105 Non-flammable Can be removed with water Non-corrosive Environmental-friendly Slightly foaming Slightly basic High yield Physical and chemical data Basis: Tenside Solution VOC-content: 0% w/w Colour : transparent Smell : characteristic Appearance: foam Relative density at 20°C : 1.02 g/ml Yield : 2.8 g/sec. Vapour pressure at 20°C : 8 - 9 bar pH-value: 7.0 - 7.5 Residual pressure: 3.5 - 4.5 bar Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol can, maximum nominal volume 400 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Instruction manuel Before use, carefully read and observe the warning texts on the label! Application: Bring can to room temperature. Operating temperature 5° to 30°C. Shake can for 2 minutes before use. Spray the object that needs to be examined from the usual distance until a sealed film has formed. Bubbles will indicate the leaks. Finally, surplus foam can be washed off with water. Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 31, 2011 This release replaces all eventually earlier issued versions.
Technical Information Cut and Drill Lubricant Oil to prevent over-heating of metals in cutting and drilling activities. Cut and drill Lubricant protects and lubricates the tool and reduces wear of the tool. MoTip Cut and Drill Lubricant is silicone free and non-corrosive. Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties Protects and lubricates the tool Reduces wear of the tool Silicone-free Non-corrosive Physical and chemical data Basis : mineral oil VOC-content: approximately 50% w/w Colour : brown-transparent Smell: characteristic Relative density at 20°C : 0,85 g/ml Yield : 1,77 g/sec. Vapour pressure at 20°C : 3 - 4 bar Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol can, maximum nominal volume 500 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Instruction manuel Before use, carefully read and observe the warning texts on the label! Application: Bring can to room temperature. Operating temperature 5° to 30°C. Shake for 2 minutes before use. Generously spray the tools and material to be treated. Material and tools should be kept damp during treatment. Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: November 2, 2011 This release replaces all eventually earlier issued versions. .
Order informations Leak Detector Spray to trace leakages in gas pipes. Leak detector is non-flammable and non-corrosive. Leak detector can be removed with water and is environmental friendly. Leak detector is slightly foaming and slightly basic. MoTip Leak Detector is DVGW certified, number NG/5170BR0105. For use on: Pipes, hoses, tyres, tanks, compressors, pressure switch, compressed air bottles, refrigerant circuits and systems with combustible gases. Order informations There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 31, 2011 This release replaces all eventually earlier issued versions. back