Technical Information Ceramic Paste Spray
Metal-free high-temperature paste with excellent lubricating effect. Good corrosion protection. Ideally suited for assembly work on ABS brake systems as well as for long-term lubrication of highly loaded sliding surfaces of all kinds. Temperature resistant from -40 ° C to + 1,400 ° C. The removable brush head allows for easy even application of the paste.
For use on:
ABS braking systems, bayonet, plug and screw, pipe, flange joints and fittings
Physical and chemical data
- Basis: grease very fine ceramic particles
- Colour: white
- Smell: characteristic
- Relative density at 20°C: 0.706 g/ml
- VOC value: 60%
- Vapour pressure at 20°C: 3,5 - 4 bar
- Temperature resistance: -40°C to + 1.400°C
- Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
aerosol can, maximum nominal volume 400 ml
Environment and labelling
Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse".
Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,
- Shake well before use.
- Remove moisture, dirt and grease from part to be sprayed.
- Spray on the surface without the brush and then spread the paste evenly with the brush head.
- Ensure that grating surfaces are not sprayed!
Tips for spray painting
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.
For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.
As of July 21, 2016
This release replaces all eventually earlier issued versions.