Airco Cleaner Effective foam to clean the air-conditioning in motor vehicles. MoTip Airco Cleaner gives a subtle scent as well as a lasting protection for smells. Ingredient datasheet Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use
Order informations Contact Cleaner Order informations There are no prdocuts to show. back
Order informations Engine Cleaner Order informations There are no prdocuts to show. back
Technical Information Foam Cleaner Universal cleaning foam with high dissolving properties for light contaminations. Multi foam cleaner is user-friendly and very effective and has a subtle scent. MoTip Multi Foam Cleaner to remove deposits of smoke, ink and grease. For use on: Car: seats, floor mats, door and roof trims, discs, rims Home: furniture, garden furniture, blinds Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties Removes deposits of smoke, ink and grease User-friendly Very effective High dissolving properties Subtle scent Waterbased Physical and chemical data Basis: Tenside solution VOC-content: approximately 25% w/w Colour : transparent Smell : characteristic Relative density at 20°C : 0.96 g/ml Vapour pressure at 20°C : 3 - 4 bar Appearance: foam Coverage: approx. 4 m² pH-value: 9.5 - 10.5 Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol can, maximum nominal volume 500 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Instruction manuel Before use, carefully read and observe the warning texts on the label! Application: Bring can to room temperature. Operating temperature 5° to 30° C. Shake for 2 minutes before use. Apply Foam Cleaner, leave to work for a short while and remove dirt with a clean cloth. Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 01, 2014 This release replaces all eventually earlier issued versions.
Technical Information Carburettor Cleaner Cleaner for the interior and the exterior of carburettors and valves, without disassembly. Carburettor cleaner has high dissolving properties and leaves no residue. MoTip Carburettor Cleaner is non corrosive and has a directed jetspray. Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties Directed jetspray High dissolving properties Leaves no residue Non-corrosive 360° valve Physical and chemical data Basis : Hydrocarbons VOC-content: 100% w/w Colour : transparent Smell : characteristic Relative density at 20°C : 0.84 g/ml Yield : 3,00 g/sec. Vapour pressure at 20°C : 3 - 4 bar Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol can, maximum nominal volume 500 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Instruction manuel Before use, carefully read and observe the warning texts on the label! Application: Bring can to room temperature. Operating temperature 5° to 30°C. Shake can before use. Switch off the engine and allow to cool down. Remove the air filter. Spray the exterior of the carburettor until the contamination has disappeared. Spray the visible part of the interior of the carburettor and allow to take effect. Start the engine and let idl with very limited speed. Spray carburettor cleaner several times at the air inlet and increase the speed of the engine. Switch the engine off and install the air filter. Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 01, 2014 This release replaces all eventually earlier issued versions.
Technical Information Foam Cleaner Cleaner to remove resin stickers and residues of glue from of parts of treated and untreated metal, wood, stone and various types of plastic. Label Remover has high dissolving properties and leaves no residue. MoTip Label Remover has a slow evaporation and is non-corrosive. Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties High dissolving properties Leaves no residue Slow evaporation Non-corrosive 360° valve Physical and chemical data Basis: Citrus Terpeen Colour : transparent Smell : citrus Relative density at 20°C : 0.84 g/ml Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol can, maximum nominal volume 500 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Instruction manuel Before use, carefully read and observe the warning texts on the label! Application: Bring can to room temperature. Operating temperature 5° to 30° C. Shake for 2 minutes before use. Before treatment, cover conductive parts and switch off electrical installations. Spray the parts to be treated and allow to take effect. Remove contaminations with a clean, non fluffy cloth or tissue. For parts of treated metal and plastic, we advise to test the compatibility. Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 01, 2014 This release replaces all eventually earlier issued versions.
Order informations Multi Foam Universal cleaning foam with high dissolving properties for light contaminations. Multi foam cleaner is user-friendly and very effective and has a subtle scent. MoTip Multi Foam Cleaner to remove deposits of smoke, ink and grease. For use on: Car: seats, floor mats, door and roof trims, discs, rims Home: furniture, garden furniture, blinds Order informations There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 01, 2014 This release replaces all eventually earlier issued versions. back
Order informations Citrus Cleaner Cleaner to remove resin stickers and residues of glue from of parts of treated and untreated metal, wood, stone and various types of plastic. Label Remover has high dissolving properties and leaves no residue. MoTip Label Remover has a slow evaporation and is non-corrosive. Order informations There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 01, 2014 This release replaces all eventually earlier issued versions. back
Order informations Carburettor Cleaner Cleaner for the interior and the exterior of carburettors and valves, without disassembly. Carburettor cleaner has high dissolving properties and leaves no residue. MoTip Carburettor Cleaner is non corrosive and has a directed jetspray. Order informations There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 01, 2014 This release replaces all eventually earlier issued versions. back
Industrial Cleaner Universal cleaner to remove a-polar and polar contaminations from parts, treated and untreated, of metal and various types of plastic. Industrial cleaner has high dissolving properties and leaves no residue. Industrial cleaner is non-conductive and non-corrosive. In view of the fast evaporation, industrial cleaner is very effective. MoTip Industrial Cleaner has a powerful jetspray and can be used in various positions. Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use