Technical Information Sealing Compound

Technical Information Sealing Compound

DUPLI-COLOR Sealing Compound (water-tight) is a permanent elastic, fiber-reinforced, light grey sealant. It is suitable for the repair of damaged gaps, fissures and holes in the entire scope of roofs, e.g. chimneys, drain pipes, roof-lights, skylights, rain pipes etcl

Not suitable to permanent load with water (e.g. ponds or fountains).

Quality and properties

  • water-tight
  • elastic
  • fiber reinforced
  • seals immediately and durably, even during rain and frost
  • bridges fissures up to 1 cm

Physical and chemical data

  • Basis of the binder: Modified acrylic resins
  • Colour: light grey
  • Consistency: paste-like
  • Efficiency:
    750 ml are sufficient for approx. 0.4 m²
  • Drying time (at 20°C, 65% relative air humidity):
    Dust-dry: after approx. 3 hours
    Dry to touch: after approx. 2 days
    Coatable: after 8 days
    Fully dry: after approx. 14 days
    The drying time depends on surrounding temperature, air humidity and absorpitivity of the ground. Excessive layer thickness and missing air movement can delay the drying process.
  • Storage stability:
    2 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) in the unopened original container. 
    Do not store below 5°C
  • Size: metal tins 750 ml 

Environment and labelling

Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. 

Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

Preparation of the ground:

  • Remove food during the working and drying time from the concerned rooms.
  • Possible subsoils: tar, bitumen, weldet asphalt sheeting, tar paper, fiber cement, rigid PVC, aluminium, zinc, copper, lead, stone, concrete, roof slates, shingles.
  • Ground has to be bearing, dry, clean and free from dust and fat.
  • Remove loose parts.
  • Clean aluminium, zinc and copper with a cleaner customary in the trade.
  • Clean all smooth grounds, such as rigid PVC and metals with a customary universal cleaner.

    Surface coating system:

    • Apply 1 - 2 times DUPLI-COLOR sealing compound undiluted approx. 2 mm thick with a brush.
    • In general there is a non-recurring application sufficient. In extreme cases there can be applied a second layer after 8 days.
    • For a coloured design it can be recoated with common, water-based arylic laquers.
    • Working temperature: during the whole working and drying time the temperature of the material, substrate and air is min. 8°C and max. 30°C. In cases of urgency the material can be used during rain and frost up to +5°C.

    Remarks:

    • The use in underwater environments or against pressing water is not possible.
    • Take care with plastics, the can be etched.
    • Do not use on polystyrene.
    • We recommend tests in case of unknown substrates.
     

    Order information

    * no color identification possible
    The presentation of colors may deviate from the original color.
    For printing of the order information please press "printing preview/further products".

    There are no prdocuts to show.

    Examples for use

    Disclaimer of liability

    This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

    As of March 22, 2018
    This release replaces all eventually earlier issued versions.

    News

    In November 2021, we launched our new name, European Aerosols. With our new name, we wanted to express our established position and ambition for the...

    Read more

    Ideas

    Tischdekoration für Ostern

    Tischdekoration für Ostern

    Brauchen Sie noch eine außergewöhnliche Tischdeko für Ostern? Schnell gemacht und garantiert einzigartig sind unsere Eierbecher aus Schnellzement und...

    Read more

    Public viewing

    Mit Grill, Kühlbox und Bastmatten geht es los zum Public Viewing. Wem das noch nicht langt, kann schnell noch die Grillkohlenverpackung einsprühen und...

    Read more