Technical Information Tuning Spray Paint RAL

Technical Information Tuning Spray Paint RAL

Quick-drying paint for decorative paintings, paint repairs and new paintings at the car. Suitable for metals, but also for painting glass, ceramics, stone and many other surfaces..

More than 30 popular colours according to the RAL norm available.

Quality and properties

  • High-grade acrylic quality
  • Very good coverage
  • Durable gloss
  • Excellent adhesion
  • High surface hardness and good elasticiy
  • Good flow, smooth surface
  • Quick-drying
  • Suitable for indoors and outdoors applications
  • Polishable, dirt-resistand surface
  • Very good colour retention: weather-resistant, light-proof, UV-resistant
  • Scratch-, shock- and impact-resistant

Physical and chemical data

  • Basis of the binder: acrylate co-polymeres
  • Colour: diverse
  • Smell: solvent
  • Degree of gloss (at measurement angle 60° acc. to DIN 67530):
    glossy: 80-85 gloss units
    matt: 15-25 gloss units
  • Efficiency:
    Depending on consistence and color of the ground:
    400 ml are sufficient for approx. 0.8-1.3 m² depending on colour
  • Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 10 minutes
    Non-sticky: after approx. 15 minutes
    Dry to touch: after approx. 30 minutes
    Cured: after approx. 24 hours
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature-resistant: up to 80°C
  • Storage stability:
    10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size: aerosol cans, maximum nominal volume 400 ml

Environment and labelling

Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. 

Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

  • The surface has to be clean, dry and free from fat.
  • Before use, shake the can vigorously for 3 minutes.
  • Test spray at an invisible spot to check colour-matching and compatibility of the lacquer.
  • The spray distance should be approx. 20-30 cm.
  • Spray several thin cross-coats in 3 - 5 minute intervals.
  • Do not spray over synthetic paints!

Tips for spray painting

Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

The aerosol can should have room temperature.

Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order information

 Color   Product   Bundle   Art.No. 
 SPRAY PAINT RAL 1018 gl. 400   400 ml   237980 
 SPRAY PAINT RAL 1021 gl. 400   400 ml   237997 
 SPRAY PAINT RAL 1023 gl. 400   400 ml   238000 
 SPRAY PAINT RAL 2002 gl. 400   400 ml   238017 
 SPRAY PAINT RAL 2004 gl. 400   400 ml   238024 
 SPRAY PAINT RAL 3000 gl. 400   400 ml   238031 
 SPRAY PAINT RAL 3001 gl. 400   400 ml   238048 
 SPRAY PAINT RAL 3002 gl. 400   400 ml   238055 
 SPRAY PAINT RAL 3003 gl. 400   400 ml   238062 
 SPRAY PAINT RAL 3020 gl. 400   400 ml   238079 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Tuning Spray Paint RAL
Technical Information Tuning Spray Paint RAL

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

As of October 28,  2009
This release replaces all eventually earlier issued versions.