Technical Information Clear Coat

Technical Information Clear Coat

MoTip Clear Coat Spray is a high-quality resin lacquer available in high gloss, matt and silk matt RAL and designer colours for numerous applications in and around your home.

It is suitable for wood, metal, glass, stone and most hard synthetic materials.

Quality and properties

  • Good coverage and filling power
  • Long-lasting colour and shine
  • Scratch, shock and impact proof
  • Excellent adhesion to almost all materials
  • Good corrosion protection
  • Petrol, chemical and weather proof

    Physical and chemical data

    • Basis of the binder: Alkyd resin
    • Colour: transparent
    • Smell: solvent
    • Efficiency:
      Depending on consistence and color of the ground:
      400 ml are sufficient for approx. 1.25 - 1.75 m²
      depending on colour
    • Drying time (at 20°C, 50% relative air humidity):
      Dust-dry: after approx. 30 - 60 minutes
      Tack-free: after approx. 3 4 hours
      Cured/Coatable: after approx. 24 hours
      The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
    • Temperature-resistant: up to 110°C
    • Storage stability:
      10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
    • Size:
      aerosol can, maximum nominal volume 400 ml

    Environment and labelling

    Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

    Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 
    Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. 

    Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

    Instruction manuel

    Before use, carefully read and observe the warning texts on the label!

    Pre-treatment for surfaces:

    • Surface should be clean, dry and free of grease.
    • Remove loose paint and rust, then sand and prime.
    • Once the primer has dried, sand with 600-grit sandpaper.


    Painting:

    • The surface should be clean, dry and free of grease.
    • Bring the can to room temperature.
    • Operating temperature 15 to 25°C.
    • Shake can for 2 minutes before use.
    • Spray to test compatibility on an inconspicuous area.
    • Spray from a distance of ca.25-30 cm.
    • Spray on lacquer in several thin coats.
    • During use, shake the can from time to time.
    • After use, turn the can and spray the valve empty to clean.
    • Even when thoroughly dry, do not spray with acrylic or nitro-combi lacquer!

    Tips for spray painting

    Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

    The aerosol can should have room temperature.

    Temperature should range between +10°C and +25°C, max. air humidity 60 %.

    Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

     

    Order informations

    * no color identification possible
    The presentation of colors may deviate from the original color.
    For printing of the order information please press "printing preview/further products".

    There are no prdocuts to show.

    Examples for use

    Technical Information Clear Coat
    Technical Information Clear Coat

    Disclaimer of liability

    This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

    As of: May 12, 2010
    This release replaces all eventually earlier issued versions.

    News

    In November 2021, we launched our new name, European Aerosols. With our new name, we wanted to express our established position and ambition for the...

    Read more

    Ideas

    The presto repair box with PE esin, hardener, fibreglass cloth and fibreglass fleece offers everything you need for inexpensive but effective repairs...

    Read more

    Tannenzapfen - Glanzvolle Weihnachts-Dekoration

    Attraktive Weihnachtsdekorationen können Sie leicht aus Naturmaterial, wie Tannenzapfen, gestalten. Einfach mit DUPLI-COLOR Silver Chrome ansprühen...

    Read more