Technical Information Polishing Paste
Physical and chemical data
- Basis of the binder: wax
- Colour: beige
- Smell: characteristic
- Temperature resistance: up to 100°C
- Flash point: >70°C
- Density at 20°C: 1.211 g / cm³
- Storage stability:
2 years if proper storage provided (=10°-25°C, relative air humidity of max. 60%) - Size:
Tube with 70 ml nominal volume
Environment and labelling
Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse".
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made.
Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,
Application
- The surface you want to polish has to be clean and dry.
- We recommend to test the compatibility of the product at an invisible spot.
- Apply a thin coat of the presto polishing paste by means of a lint-free cloth, then smooth evenly.
- Polish to high gloss with a soft cloth or with batting after a short drying time.
- Do not work in the sun or on warm surfaces.
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of May 14, 2018
This release replaces all eventually earlier issued versions.