Technical Information Adhesive Spray

Technical Information Adhesive Spray

presto Adhesive Spray is a multi-purpose contact adhesive for long-lasting or temporary adhesion. The spray rate can be controlled due to an adjustable valve. Problem-free, easy application.

For use on:
Carpet, cork, rubber, foam rubber, paper, cardboard, textiles, leather, metal, wood, numerous plastics and films

Quality and properties

  • Transparent Contact adhesive with a synthetic rubber base
  • Quick and reliable to use
  • Fast drying time
  • Adjustable spray head allows you to control spray rate
  • Jet spray ca. 10 cm wide
  • TRG 300 compliant

Physical and chemical data

  • Basis: synthetic resin
  • Colour: white-transparent
  • Smell: characteristic
  • Relative density at 20°C: 0.75 g/ml
  • Yield: 1.2 g/sec.
  • Vapour pressure at 20°C: 3 - 4 bar
  • Heat resistant: up to 80°C
  • Drying time (at 20°C, 50% relative air humidity):
    Drying time: 2 - 5 minutes
    Glue time / active time: max. 45 minutes
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol can, maximum nominal volume 400 ml

Environment and labelling

Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. 

Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application:

  • Bring the can to room temperature.
  • Operating temperature 5° to 30°C.
  • Surface should be clean, dry and free of grease.
  • Shake the can for 2 minutes before use.
  • Spray at a distance of ca. 25-30 cm – further for polystyrene foam (Styropor®).
  • Long-lasting adhesion: apply adhesive to both sides. After 15-20 minutes drying time, press the surfaces together.
  • Temporary adhesion: Apply a thin even amount to the material and press them together after 5 -10 minutes.
  • Apply more to extra absorbent materials. Press both pieces of material together till the adhesive dries.
  • After use, turn can upside down and spray empty to clean the valve.

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order informations

 Color   Product   Bundle   Art.No. 
 Klebespray 150ml   150 ml   429941 
 Klebespray 400ml   400 ml   306321 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Adhesive Spray
Technical Information Adhesive Spray

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

As of March 12, 2014
This release replaces all eventually earlier issued versions.

News

In November 2021, we launched our new name, European Aerosols. With our new name, we wanted to express our established position and ambition for the...

Read more

Ideas

LAMPENSCHIRM

LAMPENSCHIRM mit DUPLI-COLOR Platinum

Preiswerte Abdeckhauben lassen sich prima zu Leuchten aus dem eigenen Atelier umfunktionieren: Mit Farbspray in Pink besprüht und mit künstlichen...

Read more

Teelichter

Edles Gold bringt eine festliche Stimmung ins Haus und zaubert wunderschöne Lichreflexe in die Wohnung. Am leichtesten gelingt dies mit Farbsprays,...

Read more