Blocking Primer DUPLI-COLOR Blocking Primer to isolate soilings, for example water spots, to bind humidity on mineral grounds, e.g. plaster, concrete, in cellars, garages, on facades, walls etc. in interior and exterior premises. Helps zu avoid saline bloom. Suitable für water spots, carbon black and efflorescence. Data sheet Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks Examples for use
Blackboard Paint DUPLI-COLOR Blackboard Paint is a special effect brush paint. With this lacquer you create a surface, which you can write on with chalk. For application on smooth indoor surfaces, e.g. walls, doors, furniture etc. Can be applied on wood, metal, paintable plastics, smooth wallpapers, masonry, finery, concrete. Data sheet Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks Examples for use
Industrial Cleaner Universal cleaner to remove a-polar and polar contaminations from parts, treated and untreated, of metal and various types of plastic. Industrial cleaner has high dissolving properties and leaves no residue. Industrial cleaner is non-conductive and non-corrosive. In view of the fast evaporation, industrial cleaner is very effective. presto Industrial Cleaner has a powerful jetspray and can be used in various positions. Data sheet Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks
Technical Information Wheel Spray Gives a decorative shine to rims. Durable, high-pigmented protective coating for steel and alloy rims. For additional protection of the metal pigments and for higher gloss we recommend to seal the rims with presto Clear Lacquer art. no. 428979. Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Safety Data Sheet 2 Stepwise Manual General Remarks Quality and properties High-grade, quick-drying nitro-combi lacquer Good flow, smooth surface Weather-resistant, light-proof and non-yellowing Limited fuel-resistant Good colour and gloss retention Hard surface, abrasion-resistant Physical and chemical data Basis of the binder: nitro-combi Colour: gold, silver Smell: solvent Degree of gloss (at measurement angle 60° acc. to DIN 67530): satin matt: 40-50 gloss units 80 - 90 gloss units after coating with glossy Wheel Paint Clear Coat Efficiency: Depending on consistence and color of the ground: 500 ml are sufficient for 4-5 rims Drying time (at 20°C, 50% relative air humidity): Dust-dry: after approx. 10 minutes Dry to touch: after approx. 60 minutes Cured: after 24 hours Coatable with clear lacquer: after approx. 60 minutes The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. Temperature-resistant: up to 80°C Storage stability: Touch-up pencils 5 years; aerosols 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol cans with maximum nominal volume 500 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Using instructions The most presto spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label. Before use, carefully read and observe the warning texts on the labels! Application Preparation of the ground: Carefully clean rims from dirt, fat and brake-dust. Treat existing pore rust with presto Deruster. The ground has to be sanded, clean, dry and fat-free. Mask off the rim edges with masking tape. Use paper to protect surrounding area from spray-dust. Prime with presto Primer. After drying, slightly sand (sanding paper grain P600) Lacquering: Before use, shake the can vigorously for 3 minutes. Test spray to check colour-matching. Spray several thin coats in 3 - 5 minute intervals from a distance of approx. 25 cm. After 60 minutes drying time, coat with presto Clear Lacquer to protect the metal pigments in the lacquer. Do not spray over synthetic paints! Tips for spray painting Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist. The aerosol can should have room temperature. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Bestellangaben Color Product Bundle Art.No. presto Felgengold 500 500 ml 428931 presto Felgensilber 500 500 ml 428924 printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of April 29, 2010. This release replaces all eventually earlier issued versions.
Technical Information Clear Varnish Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties High-grade acrylic quality Quick-drying Durable gloss Excellent adhesion Very hard surface, good elasticity Good flow, smooth surface Suitable for indoors and outdoors applications Polishable Resistant to dirt due to very smooth surface Weather-resistant, light-proof, UV-proof (non-yellowing Scratch-, shock- and impact-resistant Limited resistance against petrol Physical and chemical data Basis of the binder: Acrylic copolymers Colour: colourless Smell: solvent Degree of gloss (at measurement angle 60° acc. to DIN 67530): glossy: 80-85 gloss units Efficiency: Depending on consistence and color of the ground: 12 ml for small spots 150 ml are sufficient for approx. 0.5 m² 400 ml are sufficient for approx. 1.3 m² Drying time (at 20°C, 50% relative air humidity): Dust-dry: after approx. 10 minutes Dry to touch: after approx. 60 minutes Cured/Can be polished: after approx. 24 hours The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. Temperature-resistant: up to 80°C Storage stability: Aerosols: 10 years, touch-up pencils: 5 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: touch-up pencils 12 ml, aerosol cans with maximum nominal volume 150 ml resp. 400 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Using instructions The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label. Before use, carefully read and observe the warning texts on the label! Application Let the DUPLI-COLOR Metallic coat dry for at least 30 minutes. Before use, shake the clear lacquer can for 1 minute. Spray from a distance of 25 cm several thin cross-coats of the clear lacquer. Do not spray over surfaces which are painted with synthetic resin lacquer! After 24 hours drying time the spray dust can be polished off with presto Polishing Paste. Tips for spray painting Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist. The aerosol can should have room temperature. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order information printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of December 1, 2009 This release replaces all eventually earlier issued versions.
Technical Information Handcleaner Ultra Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks Quality and properties For removing heavy soiling such as paints and varnishes Very mild and skin-neutral detergent Contains environmentally neutral ingredients from renewable raw materials Physical and chemical daa Ingredients: Elcotal DX, 2-methoxy-1-methyl acetat, Sodiumlaureth sulfate, Ethylhexyl stearate, Dibutoxymethane, Isotridecyl alcohol polyoxyethylene and Parfum. Colour: light yellow pH-value: 5,5 - 6,0 Density at 20°C: 0,986 g/ml S torage stability: 24 months in the original, unopened container, proper storage conditions provided (=10°-25°C, relative air humidity max. 60%) Container/size: 250 ml Plastic bottle Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Using instructions Before use, carefully read and observe the warning texts on the label! Application Rub presto Hand Cleaner Ultra on dry, dirty hands and then rinse thoroughly with clean water. Bestellangaben Color Product Bundle Art.No. presto Handreiniger ultra 250 250 ml 448461 printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of August 16, 2019 This release replaces all eventually earlier issued versions.
Order informations Handcleaner Professional Order informations Color Product Bundle Art.No. presto Handreiniger profes.250 250 ml 448478 Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of August 16, 2019 This release replaces all eventually earlier issued versions. back
Order informations Handcleaner Ultra Order informations Color Product Bundle Art.No. presto Handreiniger ultra 250 250 ml 448461 Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of August 16, 2019 This release replaces all eventually earlier issued versions. back
Alkyton Repair Sprays Quality lacquer in high-grade synthetic quality. Due to the possibility to repair scratches and paint damages on painted surfaces quickly and efficiently, this paint prevents the formation of damages by corrosion. Ideal to repair damages which arose during assembly and maintenance, but also for special applications on difficult to reach spots, e.g. in niches or on handrails. For extensive paintings we recommend DUPLI-COLOR Alkyton Rust Protection brush paint. Data sheet Available colours/order numbers Search dealer for this product SDS-Search Stepwise Manual General Remarks Examples for use
2K Multifunctional Putty ColorMatic Multifunctional Putty Multi-purpose polyester putty for professional use for filling and easy sanding in one work cycle. Best adhesion on metal, sheet steel, zinc, aluminium as well as on many plastics. Easy and non-porous drawable, good adhesion also on vertical supports. Compatible with all conventional enamel systems. Data sheet Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks Application examples