Grand Prix Rallye Paint For contrast and partial lacquering, for example rally stripes at the car and many other purposes. Also applicable on rims and car body. To embellish rims, we recommend Fast Finish Wheel Paint. Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use
Technical Information Grand Prix Wheel Paint Gives a decorative shine to rims. Durable, high-pigmented protective coating for steel and alloy rims. For additional protection of the metal pigments and for higher gloss we recommend to seal the rims with Fast Finish Clear Lacquer Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties High-grade, quick-drying nitro-combi lacquer Good flow, smooth surface Weather-resistant, light-proof and non-yellowing Limited fuel-resistant Good colour and gloss retention Hard surface, abrasion-resistant Physical and chemical data Basis of the binder: nitro-combi Colour: silver Smell: solvent Degree of gloss (at measurement angle 60° acc. to DIN 67530): satin matt: 40-50 gloss units 80 - 90 gloss units after coating with Grand Prix glossy Clear Coat Efficiency: Depending on consistence and color of the ground: 400 ml are sufficient for approx. 4 rims Drying time (at 20°C, 50% relative air humidity): Dust-dry: after approx. 10 minutes Dry to touch: after approx. 60 minutes Cured: after 24 hours Coatable with clear lacquer: after approx. 60 minutes The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. Temperature-resistant: up to 80°C Storage stability: aerosols 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol cans with maximum nominal volume 400 ml resp. Environment and labelling Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Using instructions Before use, carefully read and observe the warning texts on the label! Application Preparation of the ground: Carefully clean rims from dirt, fat and brake-dust. Treat existing pore rust with presto Deruster. The ground has to be sanded, clean, dry and fat-free. Mask off the rim edges with masking tape. Use paper to protect surrounding area from spray-dust. Prime with Grand Prix Primer. After drying, slightly sand (sanding paper grain P600) Lacquering: Before use, shake the can vigorously for 3 minutes. Test spray to check colour-matching. Spray several thin coats in 3 - 5 minute intervals from a distance of approx. 25 cm. After 60 minutes drying time, coat with Grand Prix Clear Lacquer to protect the metal pigments in the lacquer. Do not spray over synthetic paints! Tips for spray painting Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist. The aerosol can should have room temperature. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order information Oops, an error occurred! Code: 20190321175637d5e031c5 Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of June 16, 2016 This release replaces all eventually earlier issued versions.
Technical Information Grand Prix Clear Lacquer Glossy finish for paints on acrylic or nitrocombi basis, such as Wheel-, Neon- and other non-metallic car paint sprays. Adds gloss and protecton to all rallye paintings. Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties High-grade acrylic quality Excellent adhesion Good flow, smooth surface Excellent gloss stability Hard surface, good elasticity Quick-drying Light-proof, UV-proof (non-yellowing) Resistant to weathering, dirt-repellent Scratch-, shock- and impact-resistant After curing resistant to water, dilluted acids and bases Limited fuel-resistant Physical and chemical data Basis of the binder: Acrylic copolymers Colour: colourless Smell: solvent Degree of gloss (at measurement angle 60° acc. to DIN 67530): glossy: 80-90 gloss units Efficiency: Depending on consistence and color of the ground: 400 ml are sufficient for approx. 1.0 - 1.5 m² Drying time (at 20°C, 50% relative air humidity): Dust-dry: after approx. 10 minutes Dry to touch: after approx. 50 minutes Cured/can be polished after approx. 24 hours The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. Temperature-resistant: up to 80°C Storage stability: Aerosols: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol cans with maximum nominal volume 400 ml Environment and labelling Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Using instructions Before use, carefully read and observe the warning texts on the label! Application The previous paint coat has to dry for at least 30 minutes (obsverve the instructons on the Metalleffect Spray can. Before use, shake the clear lacquer can for 3 minutes. Spray from a distance of 25 cm several thin coats. Remove spray dust after 24 hours drying time with presto Polishing Paste Do not spray over surfaces which are painted with synthetic resin lacquer! Tips for spray painting Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist. The aerosol can should have room temperature. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order information Oops, an error occurred! Code: 201903211755174b9c1e8c Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of June 16, 2016 This release replaces all eventually earlier issued versions.
Order informations Grand Prix Wheel Paint Gives a decorative shine to rims. Durable, high-pigmented protective coating for steel and alloy rims. For additional protection of the metal pigments and for higher gloss we recommend to seal the rims with Fast Finish Clear Lacquer Order informations Oops, an error occurred! Code: 20190321175605a426f040 Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of June 16, 2016 This release replaces all eventually earlier issued versions. back
Order informations Grand Prix Clear Lacquer Glossy finish for paints on acrylic or nitrocombi basis, such as Wheel-, Neon- and other non-metallic car paint sprays. Adds gloss and protecton to all rallye paintings. Order informations Oops, an error occurred! Code: 2019032117544870b342c8 Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of June 16, 2016 This release replaces all eventually earlier issued versions. back
Grand Prix Rust Protection Primer The ideal primer for use as filler and as an adhesion promoter between surface and final coat. Coatable with air-drying acrylic-, synthetic and nitro-combi lacquers. For metal, wood, ceramics, stone, carton and others. Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use
Grand Prix Wheel Paint Gives a decorative shine to rims. Durable, high-pigmented protective coating for steel and alloy rims. For additional protection of the metal pigments and for higher gloss we recommend to seal the rims with Fast Finish Clear Lacquer Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use
Grand Prix Clear Lacquer Glossy finish for paints on acrylic or nitrocombi basis, such as Wheel-, Neon- and other non-metallic car paint sprays. Adds gloss and protecton to all rallye paintings. Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use
Technical Data Sheet 2K Linemarker 2K-High performance product for inside and outside markings, which require high capacity ( e.g. industrial markings with forklifter traffic, car parks, industrial plants, etc.) Colours: white, traffic yellow, red, blue The line marker can be used in the following accessories : Speedliner² Speedmarker long Speedmarker short Speedmarker 2-wheel Accessories are available at all COLORMARK partners. Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties High coverage, quick drying quality Special valve for floor applications ensures sharp edges Specially for use in Speedliner² Containers: 500 ml fast resiliently very good resistance to water, tires, engine oil, diesel, roadsalt dilution, alcohol, etc. dirt-resistant For permanent markings (durability of the marking depends on the surface as well as location (inside /outside) and daily burden) Highly abrasion resistant very good liability on different undergrounds (at very smooth surfaces we recommend to scatter sand into the wet paint) Physical and chemical data Colours: white, traffic yellow, red, blue Storage stability: 3 years if appropriate storage provided (=10°-25°C, relative air humidity max. 60%). Efficiency: Depending on condition and colour of the ground, 500 ml are sufficient for approx. 30 m of 10 cm wide lines Drying (by a thickness of 300µm wet and at 20°C, 55% relative air humidity): Dust-dry: after approx. 45 min. Walkable: after approx. 6 hours fully loadable: after approx. 12 till 14 hours Drip time: 1 hour after tripping Contents: aerosol cans with max. nominal volume of 500 ml UV- constancy: UV - constancy is given Environment and labelling Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Using Instructions Before use, carefully read and observe the warning texts on the label! Application: For professional use only Mixing A components with hardener: Remove the protection cap from the bottom of the can and pull the pin out fully with the help of the inserted ring. This will release the knife, which will penetrate the wall of the aluminium cartridge. The cartridge will then rotate 360 °, be completely open and release the hardener. Shake the can vigorously to mix the A components with the hardener in the proper, predetermined ratio. Shake can vigorously for 2 minutes Carry out spray tests Drip time: 1 hour (20 ° C) Ready-to-use coating materials containing isocyanates can irritate the respiratory system and cause allergic reactions. There is a risk of sensitization with inhalation of vapours and spray mist. When dealing with substances containing isocyanates, you should observe all guidelines for using solvent-based coatings. In particular, spray mist and vapours should not be inhaled. Allergy and asthma sufferers and people who are prone to respiratory diseases should not work with isocyanates materials. Tips for spray painting Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order information Oops, an error occurred! Code: 20190321175840a35d0729 Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of August 21, 2014 This release replaces all eventually earlier issued versions.
