Kevin Kiel - Sales Representative Location: Haßmersheim Department: Sales representatives Function: Sales Representative Mobile phone: +49 (0) 151 18823168 Email: k.kiel(at)european-aerosols.com Alicia Gansky - Customer Service Location: Haßmersheim Department: Sales Germany Function: Customer Service Phone: +49 (0) 6266 75-299 Fax: +49 (0) 6266 75-397 Email: a.gansky(at)european-aerosols.com Erik Michel - Regional Sales Manager Location: Haßmersheim Department: Sales representatives Function: Regional Sales Manager Fax: +49 (0) 62 66 / 75-334 Mobile phone: +49 (0) 163 / 70 90 8 81 Email: e.michel(at)european-aerosols.com
Corona Virus Dear Partner, We would like to take this opportunity to advise you of our policy and measures in place in concern to the European outbreak of corona virus. European Aerosols deems it vitally important to directly take preventive measures at this point. European Aerosols Group guidelines and advice with respect to corona virus
Technical information Aqua Insulating Spray Fast drying waterbased insulating primer spray for interior and exterior application with excellent isolation and barrier effect against many different types of stains (especially water stains) on mineral-based substrates (plaster etc.), wood and concrete. Can be painted over with all emulsion paints, alkyd-based, water-based and acrylic paints; not with two-component paints. Adjustable spray cone width (horizontally and vertically). Application area: Ideal when fastness and mobility are the primary considerations. Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks Quality and properties Insulating and priming in one go Quick and easy use Low in odour Waterbased Excellent insulating and blocking behaviour against many kinds of spot, e.g. water stains or mildew on mineral grounds (pastering etc.), wood or concrete Coatable with all dispersion paints and watersoluble acrylic paints Physical and chemical data Basis: Waterbased Colour: white Efficiency: Depending on consistence and colour of the ground: 400 ml are sufficient for appox. 2m² Substrate: Wood, metal and on minerally substrates like concrete, stone, plastering etc. Drying time (at 20°C, 50% relative air humidity): Dust-dry: 30 min Re-coatable: 2 h The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. Temperature resistance: 80° Storage stability: 2 years if appropriabte storage provided (=10°-25°C, relative air humidity of max. 60%) Size: Aerosol cans, maximum nominal volume 400 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Using instructions Before use, carefully read and observe the warning texts on the label! Clean surfaces to be painted thoroughly with DUPLI-COLOR Degreaser Spray art.no. 478376, then sand The ground has to be clean, dry and free from fat. Mask off areas not to be painted. Shake can for 3 minutes. Test spray. Spray 2 or 3 thin coats. Let dry in between. Dust-dry after approx. 30 minutes, can be overpainted after 2h. After application clean the sprayhead. 3 min 20°C=60 min variable Order information printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of March 19, 2019 This release replaces all eventually earlier issued version.
Technical Information Roughcast Spray DUPLI-COLOR Roughcast Spray creates an individual surface structure, similar to a rough plaster. It is an exclusive, water-based polyurethane dispersion, which is suitable to repair and adapt a textured plastering. It can be used on misc. surfaces, such as concrete, gypsum plasterboard, sheetrock, wood etc. Can be overcoated with all dispersion paints. Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks Quality and properties Quick and easy to use, perfect for wall repairs Individual surface structure, small to medium grain size Low in odour Waterbased Makes structures like roughplaster For concrete, gypsum plasterboard, sheetrock, wood, wallpaper etc. Physical and chemical data Basis of the binder: Polyurethane dispersion Colour: white matt Efficiency: 400 ml are sufficient for approx. 1,5m² Drying time (at 20°C, 45 % relative air humidity): drying after 60 minutes can be coated with all dispersions The drying time depends on surrounding temperature, air humidity and absorpitivity of the ground. Storage stability: 2 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Do not store below 5°C Size: 400 ml aerosol can Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Using instructions Before use, carefully read and observe the warning texts on the label! The spray creates an individual structure of the surface, similar to a roughcast. By several thicknesses and distances of spraying you can create a fine to medium graininess. Exclusive, water-based polyurethane dispersion, suitable to repair and to align roughcast. Waterproof. Suitable for inside and outside use. Suitable for application on many surfaces: concrete, gypsum plasterboard, sheetrock, wood etc. Drying 60 minutes. Overpaintable with all dispersion paints. In case of spots of water, smoke and smut we recommend, to use first DUPLI-COLOR Isolating Primer. Order information Color Product Bundle Art.No. DC Rauputz Spray 400 400 ml 503719 printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of April 13, 2018 This release replaces all eventually earlier issued versions.
Order informations Roughcast Spray DUPLI-COLOR Roughcast Spray creates an individual surface structure, similar to a rough plaster. It is an exclusive, water-based polyurethane dispersion, which is suitable to repair and adapt a textured plastering. It can be used on misc. surfaces, such as concrete, gypsum plasterboard, sheetrock, wood etc. Can be overcoated with all dispersion paints. Order informations Color Product Bundle Art.No. DC Rauputz Spray 400 400 ml 503719 Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of April 13, 2018 This release replaces all eventually earlier issued versions. back
Adhesive Steel presto Adhesive Steel is a solvent-free, two-component repair and gluing system on the basis of epoxy resin. The product fills, glues and seals various materials such as iron and NF metals. For filling: Use as a filler, suitable for all metals, cast parts, wood, cement asbestos, ceramics and concrete. Widen cracks where possible to 2/3 of the wall thickness in a V-shape and then fill with the adhesive steel. Widen faulty borings or stripped threads out to double the original diameter and then fill with adhesive steel. For gluing: Adhesive steel bonds identical and non-identical materials firmly and durable together, even those that cannot normally, or only with difficulty, be bonded or welded together, such as steel, aluminium, lead, wood, iron and cement asbestos. For sealing: For damaged pipes or discharge pipes, in combination with suitable materials to cover the damage. Simply apply the adhesive steel to the material and treat as a bandage. Hardened layers over 5 mm thick can be handled like metals: They can be drilled, milled, filed, turned and threaded. For many applications in the private sector, in industry, metal and wood construction, in ship construction, garages and locksmith's shops. Data sheet Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks Examples for use
Corrosion Protection Primer Protects metals, such as iron and steel sheet, reliably from corrosion: for example, car-bodies made of sheet steel, motor cycle parts, iron fences, sheet metal covers, etc. The high quality Corrosion Protection Primer dries very fast, has a good adhesion and covers well. An ideal primer for even and glossy surfaces with good adhesive properties. Suitable for metal (iron, steel sheet). Before application, we recommend to remove rust spots with presto Rust Converter, e.g. art.no. 603079 . Coatable with synthetic or acrylic lacquers, e.g. DUPLI-COLOR Lackspray or DUPLI-COLOR Auto-Spray . Data sheet Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks Examples for use
Excellent well - presto repair putties When it gets cold and uncomfortable outside, you like to leave the work outside and confined to your own four walls. After all, there is always a lot to do and with the presto repair putties you have the right little helpers at hand. Whether a frayed hole, a broken wooden drawer or a loose tile in the bathroom. With the presto repair putties you have the right solution for every problem. This opinion is also the trade magazines "home improvement practice" and "self is the man" and have awarded our spatula accordingly.
Vaseline Spray Universal, transparent, lubricant and preservative with excellent adhesion. Vaseline spray is water-repellent, pH-neutral and resistant to weather influences and weak acids and bases. Vaseline spray has excellent corrosion prevention and prevents wear and sticking. MoTip Vaseline Spray is resistant to temperatures of - 30°C up to + 160°C. For use on: Antennae, plug-in connections and bolted connections and locks Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use