Technical Information pre-fill System water-based

Technical Information pre-fill System water-based

The ColorMatic pre-fill spray paint can is prefilled with propellant and specific additives and then filled by VitoMat filling machines with the desired coat. Innovative spray and valve technology guarantee the fine broad jet atomisation, a high application rate and constant pressure for best workmanship and professional-quality end results.
The ColorMatic water-based pre-fill system offers a large selection of prefilled spray paint for almost all manufacturers’ water-based coating systems.

Application:

Ideal for spot repairs or refinishing parts

Quality and properties

  • A spray can pre-filled with propellants and specific additives. The water-based coat is transferred into the can by a filling device, producing a ready-to-use end product
  • High coverage
  • Simple, time-saving application
  • Excellent atomisation
  • Light blending
  • Suitable for filling with all ColorMatic filling machines
  • The dealer adds the desired coat colour and is, therefore, liable for the final product


Ideal for spot repairs

Physical and chemical data

  • Colour: depending on filling
  • Smell: solvent
  • Degree of gloss: it is necessary to re-coat basecoats with 2K clear coat. After the varnishing with clear coat the basecoat is featured with an excellent weather- and chemical resistance and a everlasting gloss.
  • Efficiency:
    Depending of consistence and colour of the substrate
  • Substrate:
    Depending on the colour of the substrate apply Primer Filler HG1 - HG8, ColorMatic Plastic Primer, Art.-Nr. 856 563, ColorMatic 1K Primer for Alu, art.-no. 190278, ColorMatic 1K Primer for Zinc, art.-no. 190285, ColorMatic 1K Epoxy Primer, art.-no. 174414, ColorMatic 1K Filler, art.-no. 856556 + 874987, ColorMatic 2K Hi-Speed Primer Filler, art.no. 195327
  • Drying (at 20°C, 50% relative air humidity):
    The drying time depends on the ambient temperature, the air humidity, the applied paint thickness and the filled type of paint (refer to information of the paint manufacturer)
  • Storage: empty cans: 5 years
    Filled cans: WB-A to WB-F, WB-H: within one week
    WB-G: within 4 days.
    WB-I: within 3 days, depending on colour up to 10 days
    If appropriate storage provided (=10°-25°C, relative air humidity max. 60%)
  • Size:
    Aerosol cans, maximum nominal volume 400 ml, filling quantity 100ml
  • VOC-value: 216g

 

 

Environment and labelling

Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. 

Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

  • Pre-treat undercoat with a basecoat as usual and clean with ColorMatic silicone cleaner no. 174469
  • Shake can vigorously for 2 minutes
  • Carry out spray tests
  • Base cats must be coated with ColorMatic 2K hi-speed clear coat gloss no. 187216, or satin no. 231650
  • Surface can be re-coated after 30 min drying-time
    2-3 full coats, 50µ
  • Leave to dry for 2 minutes between coats

  • For professional use only
  • Wear an appropriate respirator (recommended type A2/P3)

Overview paint manufacturers

Technical Information pre-fill System water-based
Technical Information pre-fill System water-based
2 min
Technical Information pre-fill System water-based
3=approx. 20µ
Technical Information pre-fill System water-based
*
Technical Information pre-fill System water-based
*
Technical Information pre-fill System water-based
Technical Information pre-fill System water-based

*Pay attention to manufacturer's instructions/ Angaben des Lackherstellers beachten

 

Order information

 Color   Product   Bundle   Art.No. 
 CM pre-fill WB-A T/V 300ml   400 ml   192555 
 CM pre-fill WB-B T/V 230ml   400 ml   161803 
 CM pre-fill WB-C T/V 273ml   400 ml   174438 
 CM pre-fill WB-D T/V 261ml   400 ml   162268 
 CM pre-fill WB-E T/V 218ml   400 ml   174421 
 CM pre-fill WB-F T/V 261ml   400 ml   192562 
 CM pre-fill WB-G T/V 284ml   400 ml   202414 
 CM pre-fill WB-H T/V 201ml   400 ml   257360 
 CM pre-fill WB-I T/V 290ml   400 ml   334443 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information pre-fill System water-based
Technical Information pre-fill System water-based

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

As of August 01, 2022
This release replaces all eventually earlier issued versions

News

In November 2021, we launched our new name, European Aerosols. With our new name, we wanted to express our established position and ambition for the...

Read more

Ideas

Gartensofa

Das nächste Spiel schauen wir auf dem selbstgebauten EM-Gartensofa! Mit DUPLI-COLOR platinum und Textilspray geht es in die nächste Runde.

Read more

With the ferreous DUPLI-COLOR Magnetic Paint wall paint you banish holes from pins and residues of adhesive tape from your walls. The clou: you even...

Read more