Technical information Shortwave Infrated Emitter
The short wave infrared emitter significantly reduces drying times for spot repairs. This makes it indispensable, because time is as important as money when it comes to spot and part coating. Wheels make it portable and it can be easily moved anywhere. The lamp is height adjustable and rotates 360°.
Ideal for spot repairs and refinishing parts
Qualität und Eigenschaften
- Good material penetration
- Does not heat up
- Long life
- High performance
- Stable machine including 4 wheels
Physical and chemical data
- Measurements: H 155 x B 69 x T 50cm;
Measurements lamp: H 20 x B 55 x T 10 cm
- Technical data: 1x1050 Watt, 220 Volt-50/60 Hz
Electronic clock timer 0 - 35 min - full capacity
Electronic clock timer 0 - 35 min - half capacity
- Working distance: approx. 50 cm
- Construction: Emitter rotates 360°, the lamp is height adjustable and rotates 360°
Environment and labelling
Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse".
Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,
- Please refer to the attached instructions for detailed explanation
Hints concerning infrared drying
With plastic components, please observe requirements for adequate distance. The surface might otherwise be damaged. With darker paints, too, the stronger absorption of infrared radiation causes greater heat generation. Hence, the distance to the object needs to be adjusted accordingly.
* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".
Examples for use
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.
For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.
As of July 30, 2010
This release replaces all eventually earlier issued versions.