Technical information spare spray nozzles

Technical information spare spray nozzles

The optimally balanced technology of valve and spray nozzle at ColorMatic products is also a reason that spraying like a spray gun is possible. If the spray nozzle doesn't work at unpredicted reasons, it is advisable to have the matched nozzle at your fingertips.
6 different original spray nozzles in packs of 10 are available. The respective products to the spray nozzle are listed on the backside.

Application
Quick replacement of spray nozzles for professional spot repair




Quality and properties

  • six of the most important types of spray nozzles which are used at ColorMatic
  • Quick change if the nozzle is damages
  • Original high quality accessory
  • Favorably pack of 10

 

 

Physical and chemical data

  • Description: Variable spray head, broad jet and round jet spray heads in different versions and original quality for quick replacement.
    - Variable spray head: spray jet is horizontal and vertikal adjustable, also the width of spray jet
    - broad jet nozzle: horizontal and verticale adjustment of the spray jet
    - round jet: consistent spray jet
  • Content:
    each 10 St.

 

 

 

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

  • Please refer to the attached instructions for detailed explanation

If you want to try a nozzle which you normally wouldn't find at this product, you should test it absolutely before application.
Please note: Put on and take off the nozzle always with a rotary motion. Put on the new nozzle always immediately, otherwise the sealing gasket beneath could swell and cause problems.
Following an overview about the used nozzles.

Technical information spare spray nozzles

Extraction tips

You will achieve highest security and maximum efficiency if you position the funnel of the extraction system as close as possible to the object in question. This improves extraction performance to a considerable extent.

 

Order information

 Color   Product   Bundle   Art.No. 
 CM SK-Set 37389 Flachstr. 10St   Stück   379321 
 CM SK-Set 41330 weiß/weiß 10St   Stück   379413 
 CM SK-Set 44848 weiß/sch. 10St   Stück   379444 
 CM SK-Set 57021 Flachstr. 10St   Stück   379406 
 CM SK-Set 58737 variabler 10St   Stück   379314 
 CM SK-Set 60550 sch./weiß 10St   Stück   379420 
printing preview/further products

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical information spare spray nozzles
Technical information spare spray nozzles

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of January 17, 2014
This release replaces all eventually earlier issued versions.

News

It runs like clockwork thanks to the new presto Penetrating Oil! Due to its high creeping ability, the powerful special oil penetrates into the finest...

Read more

Ideas

Scratches can be quickly repaired with presto light filler without affecting the weight of the board.

 

Also suitable for use on:

Model planes,...

Read more

Modern style in sophisticated and trendy colours – perfect for special occasions.

Read more