Technical Information Cleaner & Degreaser

Technical Information Cleaner & Degreaser

A mild universal degreaser and cleaner to remove residues of silicone, wax, tar, fat etc. before application of paint. For use on porcelain, glass, acrylic glass, ceramics and blank metals. Evaporates quickly without leaving residues.

Ideally suitable for pre-treatment before colouring cups, plates, mugs or vases and bottles for decorative purpose and everyday use. Improves the colour brilliance and lifetime of the paint.

Quality and properties

  • Mild effect
  • Universal use
  • Removes residues of silicone, wax, tar, fat etc. before application of paint.
  • High solvency
  • Good degreasing properties
  • Leaves no residues
  • Non-corrosive

Physical and chemical data

  • Basis: specific solvents
  • Colour: transparent
  • Smell: characteristic
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size: aerosol cans, maximum nominal volume 150 m

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!


  • Before spraying bring the can to room temperature
  • Test surface for compatibility.
  • Spray on the parts to be cleaned and wipe off with a dry, fatfree and lintfree cloth.

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!


Order information

 Color   Product   Bundle   Art.No. 
 CLEANER SPRAY 150   150 ml   319860 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Cleaner & Degreaser
Technical Information Cleaner & Degreaser

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of October 27, 2011
This release replaces all eventually earlier issued versions.