Technical Information Sealing Lacquer
DUPLI-COLOR Sealer is quick-drying, extemely low-wear, friction-free and non-yellowing. The sealer is excellently suitable for wood and wood-simalar objects like parquet floor, timber stairs, tables, chairs etc.
Quality and properties
- For interiour and exteriour
- Impact and shock-resistant
- Extremely low-wear
Physical and chemical data
- Basis of the binder: Alkyd resin
- Colour: transparent
- Smell: solvent
- Degree of gloss (at measurement angle 60° acc. to DIN 67530):
satin gloss or matt
per 250 ml can: 3 m²
per 750 ml can: 9 m²
- Drying time (at 20°C, 65% relative air humidity):
Coatable: after 12 hours
Walk-on-able: after 24 hours
The drying time depends on surrounding temperature, air humidity and absorpitivity of the wooden ground.
- Best working temperature and object temperature:
10 - 25°C
- Cleaning of tools: immediately after use with a synthetic thinner
- Storage stability:
5 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) in the unopened original container.
Do not store below 5°C
- Size: metal tins 250 ml and 750 ml
Environment and labelling
Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse".
Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,
Preparation of the ground:
- The surface has to be bearing, dry, clean and free from fat and rust.
- 2 paint coats in 4 hours intervals.
- Between the coats we recommend to sand with a fine grain.
- Can be diluted with max. 5 % synthetic thinner.
|Siegellack farblos matt 250||250 ml||168833|
|Siegellack farblos matt 750||750 ml||168857|
|Siegellack farblos sdgl. 250||250 ml||168826|
|Siegellack farblos sdgl. 750||750 ml||168840|
* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".
Examples for use
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.
For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.
As of February 19, 2018
This release replaces all eventually earlier issued versions.