Technical Information Marker for Construction and Forestry (sprayhead for writing)

Technical Information Marker for Construction and Forestry (sprayhead for writing)

DUPLI-COLOR Marking Spray for Construction and Forestry for temporary markings, especially on tree trunks and timber. Also suitable for markings on streets and buildings.

The special sprayhead with capillary tube allows to spray plane, but also writings.

Available colours: fluorescent: blue, yellow, green, orange, red, non-fluo: white and black

Optional accessory:

  • Metal spray handle

Quality and properties

  • Special spray nozzle for plane applications and also for targeted writing
  • Excellent adhesion even on humid surfaces
  • Markings shine bright for 6 - 9 months
  • Excellently covering quality grants high efficiency
  • Intensive luminance of the fluorescent shades
  • Environmentally sound and not hazardous to health
  • Safe during frost up to -10°
  • Self-cleaning valve

Physical and chemical data

  • Basis: acrylic
  • Colour: diverse
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity max. 60%).
  • Efficiency:
    Depending on condition and colour of the ground,
    500 ml are sufficient for up to 140 m
  • Drying (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 10 minutes
    Dry to touch: after approx. 30 minutes
    Cured: after approx. 24 hours
    Can be overworked: after approx. 24 hours
    The drying time depends of temperature of surroundings, air humidity and thickness of the applied layer.
  • Contents: aerosol cans with max. nominal volume of 500 ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Application

  • Shake can for approx. 3 minutes.
  • Test spray at an invisible spot.
  • Spray distance approx. 25 cm.
  • Apply the desired marking.

Tips for spray painting

Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

The aerosol can should have room temperature.

Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order information

 Color   Product   Bundle   Art.No. 
 B&F-Mark. Kapillar weiß 500   500 ml   634772 
 B&F-Mark.Kapillar l.blau 500   500 ml   642906 
 B&F-Mark.Kapillar l.gelb 500   500 ml   642876 
 B&F-Mark.Kapillar l.grün 500   500 ml   642890 
 B&F-Mark.Kapillar l.orange 500   500 ml   642883 
 B&F-Mark.Kapillar l.rot 500   500 ml   634765 
 B&F-Mark.Kapillar schwarz 500   500 ml   695094 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Marker for Construction and Forestry (sprayhead for writing)
Technical Information Marker for Construction and Forestry (sprayhead for writing)

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of September 5,  2010
This release replaces all eventually earlier issued versions.

News

It runs like clockwork thanks to the new presto Penetrating Oil! Due to its high creeping ability, the powerful special oil penetrates into the finest...

Read more

Ideas

Scratches can be quickly repaired with presto light filler without affecting the weight of the board.

 

Also suitable for use on:

Model planes,...

Read more

Ausrangiere Guglhupfformen findet man manchmal auf dem Flohmarkt oder beim Trödler. Doch zum Wegwerfen sind sie viel zu schade. So können aus alten...

Read more