Technical Information 2-Coat Clear Lacquer

Technical Information 2-Coat Clear Lacquer

Weather-resistant, high gloss finish for DUPLI-COLOR acrylic sprays.

Absolutely necessary to seal all metallic and pearl lacquers to protect them from weathering and environmental impact.

Even suitable as top coat for DUPLI-COLOR Tuning Wheel Paint (e. g. Wheel Silver art.no. 191305, Wheel Gold art.no. 192012).

Quality and properties

  • High-grade acrylic quality
  • Quick-drying
  • Durable gloss
  • Excellent adhesion
  • Very hard surface, good elasticity
  • Good flow, smooth surface
  • Suitable for indoors and outdoors applications
  • Polishable
  • Resistant to dirt due to very smooth surface
  • Weather-resistant, light-proof, UV-proof (non-yellowing
  • Scratch-, shock- and impact-resistant
  • Limited resistance against petrol

Physical and chemical data

  • Basis of the binder: Acrylic copolymers
  • Colour: colourless
  • Smell: solvent
  • Degree of gloss (at measurement angle 60° acc. to DIN 67530):
    glossy: 80-85 gloss units
  • Efficiency:
    Depending on consistence and color of the ground:
    12 ml for small spots
    150 ml are sufficient for approx. 0.5 m²
    400 ml are sufficient for approx. 1.3 m²
  • Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 10 minutes
    Dry to touch: after approx. 60 minutes
    Cured/Can be polished: after approx. 24 hours
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature-resistant: up to 80°C
  • Storage stability:
    Aerosols: 10 years, touch-up pencils: 5 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size: touch-up pencils 12 ml, aerosol cans with maximum nominal volume 150 ml resp. 400 ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

 

  • Let the DUPLI-COLOR Metallic coat dry for at least 30 minutes.
  • Before use, shake the clear lacquer can for 1 minute.
  • Spray from a distance of 25 cm several thin cross-coats of the clear lacquer.
  • Do not spray over surfaces which are painted with synthetic resin lacquer!
  • After 24 hours drying time the spray dust can be polished off with presto Polishing Paste.

Tips for spray painting

Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

The aerosol can should have room temperature.

Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order information

 Color   Product   Bundle   Art.No. 
 DS Zwei-Schicht-Klarlack 150   150 ml   133626 
 DS Zwei-Schicht-Klarlack 400   400 ml   191695 
 DS Zweischicht farblos 12   12 ml   190018 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information 2-Coat Clear Lacquer
Technical Information 2-Coat Clear Lacquer

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of December 1,  2009
This release replaces all eventually earlier issued versions.

News

DUPLI-COLOR Profi assortment is the perfect supplement for every craftsmen. It saves equipment, time and therefore a lot of money. DUPLI-COLOR Profi...

Read more

Ideas

Achtung, es wird schaurig! Fledermäuse fliegen und einsame Hände halten Kerzen: Halloween kann kommen! Um den typischen orange/ schwarzen Grusellook...

Read more

You can create an individual water landscape for your garden with presto special Resin and Fibreglass Mats. The diverse nature of the stone, sand and...

Read more