Technical Information Schraubensicherungslack
DUPLI-COLOR Screw locking lacquer avoids the loosening of screw connections, nuts and other elements. Also suitable as locking varnish: the manipulation on screws, nuts etc. can be stated by damages in the paintfilm. Also excellently suitable as marking lacquer.
Quality and properties
- Color: red
- High stability, 25 Nm, second strongest grade out of 4 degrees of strengthes
- Excellent adhesion
- Suitable for nearly all surfaces
- Excellently resistant to water, oil and benzine, to dilluted acids and bases
- Very easy application
Physical and Chemical Data
- Basis of the binder: solventbased, quickdrying 1component lacquer
- Colour: red
- Storage stability:
24 months if appropriate storage provided (=10°-25°C, relative air humidity max. 60%).
- Drying time: at 20°C and 65 rel. air humidity:
dust-dry after 15-20 min.
dry to touch: after approx. 45 min.
scratch-proof: after approx. 24 hours
- Disposal: Put only empty tube into the recycling bin. Bring tubes with remainders of paint to the special refuse disposal.
- Size: 20 ml tube
Environment and labelling
Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse".
Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,
Before use of the screw locking laquer carefully read and observe the safety texts on the tube?
- The spots which you want to lock have to be clean and free of fat.
- Drop the Screw locking lacquer onto the spot or apply it with a fine brush.
Examples for use
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.
For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.
As of July 11, 2016
This release replaces all eventually earlier issued versions.