Technical information Spot Blender

Technical information Spot Blender

DUPLI-COLOR Spot Blender is universally applicable for spot blending of clear coats and topcoats. It is specially formulated to ensure the overspray will blend into the transition zone, leaving no visible difference between the old and new paintwork. This reduces the need to polish.

Apply DUPLI-COLOR 2K Super Clear Coat, DUPLI-COLOR 2-coat clear lacquer, DUPLI-COLOR Auto-Spray or DUPLI-COLOR Auto-Color to the blended area, immediately after application.

Ideal for spot repairs.


Quality and properties

  • Essential for spot coating
  • Additional coating to DUPLI-COLOR Clear Coats and Auto-Sprays
  • Simple time-saving processing
  • Dissolves well
  • Easy to polish
  • Significantly reduces the need to polish
  • Blends in seamlessly edge areas

Physical and chemical data

  • Basis of binder: Special resin
  • Colour: transparent
  • Smell: solvent
  • Temperature resistance: to 90°C
  • Storage stability:
    10 Jahre bei sachgerechter Lagerung (=10°-25°C, relative Luftfeuchte von max. 60%)
  • Size:
    Aerosol cans, maximum nominal volume 150 ml


Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!


  • Shake can.
  • Test spray.
  • Immediately after applicaton of the lacquer, spray from a distance of 25 cm several thin caots into the outer zones.
  • After curing the outer zone can be polished.



Hints concerning application

For best results, we recommend the application of the DUPLI-COLOR Spot Blender approx. 10 cm inside and outside the edge areas.


Order information

 Color   Product   Bundle   Art.No. 
 DC Beispritzlack 150   150 ml   373060 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical information Spot Blender
Technical information Spot Blender

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of March 11, 2013
This release replaces all eventually earlier issued versions.


MOTIP DUPLI recalls the "presto premium rim cleaner" (aerosol can, contents 400 ml, article number 455896) The technical composition of the product...

Read more


Porous material and holes up to 1 cm wide can easily be bridged or repaired in broken plastic using presto extra Fibreglass Filler.


Also suitable...

Read more

You can create an individual water landscape for your garden with presto special Resin and Fibreglass Mats. The diverse nature of the stone, sand and...

Read more