Technical Data Sheet UV Marker

Technical Data Sheet UV Marker

Distein UV Marker is a transparent Spray which you can use for marking surfaces, which should be invisible.

You can´t see the Spray by daylight, but with UV light.

Suitable for glazed, rough or primed surfaces like timber, metal, varnished plastics, carton, walls, machinery, etc.


Quality and properties

  • weather-proof, good adhesion on wet surfaces and direct insolation
  • transparent
  • forst-proof till -10°C
  • environment-neutral propellant, without CFC
  • without toluene
  • without cadmium, lead and other heavy metal
  • invisible in daylight

Physical and chemical data

  • Color:
    daylight:transparent UV Light:blue
  • Efficiency:
    Depending on surface and color 400ml are sufficient for approx. 2-3m²
  • Drying:
    Dust-dry:after 20 minutes
    Dry to touch:after 30 minutes
    Fully dried:after 24 hours
  • Storage stability:
    5 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using Instructions

Before use, carefully read and observe the warning texts on the label!

  • Before use, shake can well for 2 minutes.
  • Spray to test colour and compatibility on an inconspicious area.
  • Distance approx 10-15 cm

Order information

 Color   Product   Bundle   Art.No. 
 UV - Markierung 400   400 ml   130069 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of October 29,2012
This release replaces all eventually earlier issued versions.


MOTIP DUPLI recalls the "presto premium rim cleaner" (aerosol can, contents 400 ml, article number 455896) The technical composition of the product...

Read more


Here you can make stylized leaf-pattern wall paintings. The trick: the leaves are not painted but sprayed with stencil technology. The brilliant white...

Read more

Unsightly dents on wings or bumpers can be easily and conveniently removed with MoTip Spray Paints.

Read more