Technical Information Self Fusion Tape
Vulcanising tape that forms a homogeneous mass after application, without the need for heat or pressure.
Quality and properties
- Suitable for insulating electric cables, sealing hoses etc.
- For temporary and permanent repairs
Physical and chemical data
- Carrier: PIB rubber
- Maximum temperature: 90°C
- Tensile strength: 2 mPa
- Thickness: 0,50 mm
- Breakdown voltage: 21 kV
The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!
|Klebeb. Vulkanisierb. 19mmx10m||Stück||SF1910|
|Klebeb. Vulkanisierb. 25mmx3m||Stück||SF2503|
* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".
Examples for use
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.
For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.
As of August 14, 2014
This release replaces all eventually earlier issued versions.