Technical Information Ver-Omatic

Technical Information Ver-Omatic

The Ver-Omatic Treibgas/Verd. 275 pre-fill spray paint is prefilled with propellant and specific additives and then filled by filling device with the desired coat. Innovative spray and valve technology guarantee the fine broad jet atomisation, a high application rate and constant pressure for best workmanship and professional-quality end results. The Ver-Omatic Treibgas/Verd. 275 is a pre-filled can with propellant gases and solvent that can be filled with solvent-based basecoats.

Quality and properties

  • A spray can pre-filled with propellant and solvents. The paint is transferred via a filling device int the can to produce a ready-to-use end product (dealers liability)
  • Simple, time-saving application
  • Excellent atomization
  • Light blending

Ideal for spot or refinishing parts.

Physical and chemical data

  • Colour: depending on filling
  • Smell: solvent
  • Efficiency:
    Depending on consistence and color of the ground.
  • Substrate:
    depending on filling
  • Drying time (at 20°C, 50% relative air humidity):
    the drying time depends on surrounding temperature, air humidity, thickness of the applied coat and the filled type of paint (refer to information of the paint manufacturer)
  • Storage stability:
    Empty cans: 5 years
    Filled cans: depending on type of paint from several hours up to 6 months (information from specialist dealer): If appropriate storage provided (=10°-25°C, relative air humidity max. 60%)
  • Size: aerosol cans, maximum nominal volume 400 ml, filling quantity 100 ml
  • VOC-value: 218g

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

Before use, carefully read and observe the warning texts on the label!

  • Clean the surface to be painted thoroughly with silicone cleaner, then sand.
  • Larger bare surfaces must be pre-primed with the appropriate primer.
  • The area must be dry and free of dust and grease.
  • Shake can vigorously for 2 minutes.
  • Carry out spray test.
  • Compatibility testing is necessary.
  • For professional use only.

*Pay attention to manufacturer's instruction

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order informations

 Color   Product   Bundle   Art.No. 
 2K Linemarker blau 500   500 ml   387067 
 2K Linemarker gelb 500   500 ml   387081 
 2K Linemarker rot 500   500 ml   387050 
 2K Linemarker weiß 500   500 ml   387043 
 Color   Product   Bundle   Art.No. 
 2K Super Klarlack hgl F/I 160   200 ml   04209 
 Color   Product   Bundle   Art.No. 
 2K Super Klarlack hgl. D 160   200 ml   369469 
 Color   Product   Bundle   Art.No. 
 2K Super Klarlack hgl. D 160   200 ml   369469 
 Color   Product   Bundle   Art.No. 
 2K Super Klarlack hgl. I 160   200 ml   365201 
 Color   Product   Bundle   Art.No. 
 3-D-Effekt Spray 150   150 ml   888946 
 Color   Product   Bundle   Art.No. 
 3-D-EFFEKT SPRAY glitter 150   150 ml   665578 
printing preview/further products

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Ver-Omatic
Technical Information Ver-Omatic

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of July 12, 2018
This release replaces all eventually earlier issued versions.

News

It runs like clockwork thanks to the new presto Penetrating Oil! Due to its high creeping ability, the powerful special oil penetrates into the finest...

Read more

Ideas

These magical lanterns will get a lot of attention. You’ll find similar decorations that really catch the eye with a little colour, at flea markets or...

Read more

Porous material and holes up to 1 cm wide can easily be bridged or repaired in broken plastic using presto extra Fibreglass Filler.

 

Also suitable...

Read more