Technical Information Silicone Spray

Technical Information Silicone Spray

Silicone spray to lubricate and protect plastic or rubber parts. Silicone spray is water-repellent, pH-neutral and resistant to weather influences and weak acids and bases. Silicone spray prevents freezing and drying out of rubber parts and creaking and squeaking of plastic parts. Silicone spray has outstanding mechanical and thermal stability. MoTip Silicone Spray hat a directed jetspray and is resistant to temperatures of - 50ºC up to + 200ºC.


For use:

  • Protecting for electronic contact from moisture and corrosion 
  • Lubricating seat rails, head rests and sunroofs
  • Keeping door rubbers flexible
  • On cold and warm water valves in heating systems and sanitary facilities

Quality and properties

  • Excellent adhesion
  • Water-repellent
  • Prevents freezing and drying out of rubber parts
  • Prevents creaking and squeaking of plastic parts
  • Outstanding mechanical and thermal stability
  • Resistant to weather influences
  • Resistant to weak acids and bases
  • Directed jetspray

Physical and chemical data

  • Basis: Polydimethylsiloxaane (high quality silicon oils)
  • Colour: transparent
  • VOC-content: approximately 88% w/w
  • Smell: characteristic
  • Relative density at 20°C: 0.72 g/ml 
  • Vapour pressure at 20°C: 3 - 4 bar
  • Refractive index at 20°C: 1.403
  • Disruptive strength: 14 kv/mm at a temperature of 20°C
  • Temperature resistance: -50°C to +200°C
  • pH-value: neutral
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol can, maximum nominal volume 500 ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Instruction manuel

Before use, carefully read and observe the warning texts on the label!

Application:

  • Bring the can to room temperature.
  • Operating temperature 5° to 30°C.
  • Cover coated or plastic parts with masking tape.
  • The surface should be clean, dry and free of grease.
  • Shake can for 2 minutes before use.
  • According to condition and size, apply fine, even coats to the parts to be treated e.g. ca. 5 cm for door rubber or up to ca. 20 cm for a cabrio roof.
  • For treatment of plastic parts and rubber, flash off for ca. 5 minutes and then rub with a soft cloth.
  • Do not use on dashboard, wheel running surface, steering wheel and pedals.

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order informations

 Color   Product   Bundle   Art.No. 
 2K Linemarker blau 500   500 ml   387067 
 2K Linemarker gelb 500   500 ml   387081 
 2K Linemarker rot 500   500 ml   387050 
 2K Linemarker weiß 500   500 ml   387043 
 Color   Product   Bundle   Art.No. 
 2K Super Klarlack hgl F/I 160   200 ml   04209 
 Color   Product   Bundle   Art.No. 
 2K Super Klarlack hgl. D 160   200 ml   369469 
 Color   Product   Bundle   Art.No. 
 2K Super Klarlack hgl. D 160   200 ml   369469 
 Color   Product   Bundle   Art.No. 
 2K Super Klarlack hgl. I 160   200 ml   365201 
 Color   Product   Bundle   Art.No. 
 3-D-Effekt Spray 150   150 ml   888946 
 Color   Product   Bundle   Art.No. 
 3-D-EFFEKT SPRAY glitter 150   150 ml   665578 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Silicone Spray
Technical Information Silicone Spray

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of: October 1, 2014
This release replaces all eventually earlier issued versions.

News

It runs like clockwork thanks to the new presto Penetrating Oil! Due to its high creeping ability, the powerful special oil penetrates into the finest...

Read more

Ideas

Broken edges can be quickly glued back together for long-term stability with presto Bodyfiller.

 

Also suitable for use on:

Cupboard hinges, wall...

Read more

Nostalgisch verschnörkelte Gitterbettchen lassen die Herzen aller Mamas höher schlagen, denn sie sehen im Kinderzimmer einfach süß aus. Mit einem...

Read more