Technical Information Vaseline Spray
Universal, transparent, lubricant and preservative with excellent adhesion. Vaseline spray is water-repellent, pH-neutral and resistant to weather influences and weak acids and bases. Vaseline spray has excellent corrosion prevention and prevents wear and sticking. MoTip Vaseline Spray is resistant to temperatures of - 30°C up to + 160°C.
For use on:
Antennae, plug-in connections and bolted connections and locks
Quality and properties
- Excellent adhesion
- Prevents wear and sticking
- Can be used in the food industry
- Resistant to weather influences
- Resistant to weak acids and bases
- Excellent corrision prevention
- Misty spray pattern
Physical and chemical data
- Basis: Vaseline
- VOC-content: approximately 85% w/w
- Colour: white
- Smell: characteristic
- Relative density at 20°C: 0.89 g/ml
- Yield: 1.11 g/sec.
- Vapour pressure at 20°C: 3 - 4 bar
- 4 Ball EP-test (AS TM D 2596): 3136 N
- 4 Ball Wear-test (AS TM D 2266): < 0,4 mm
- Drop point: 42°C to 60°C
- Temperature resistance: -30°C to +160°C
- pH-value: neutral
- Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
aerosol can, maximum nominal volume 500 ml
Environment and labelling
Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse".
Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,
- Bring spray to room temperature.
- Operating temperature 5° to 30°C.
- Shake can for 2 minute before use.
- Spray onto the parts to be treated.
- Optimum lubrication occurs once the solvent has evaporated.
Tips for spray painting
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".
Examples for use
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.
For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.
As of: October 1, 2014
This release replaces all eventually earlier issued versions.