Technical Information Multi Spray

Technical Information Multi Spray

Universal oil to lubricate, protect and clean parts of metal and plastic. Multi spray has good penetrating properties and a cleansing effect. Multi spray is moisture repellent and rust preventive. Multi spray to remove oil, grease, wax, underbody coating and tar and after cleaning leaves a protective film. MoTip Multi Spray has a directed jetspray.

For use on:
Locks, garden tools, gears, pedals, tools, fittings, home trainers

Quality and properties

  • Good penetrating properties
  • Moisture repellent
  • Removes iol, grease, wax, underbody coating and tar
  • Cleansing effect
  • Corrision prevention
  • Directed jetspray
  • After cleaning, a protective film remains

Physical and chemical data

  • Basis: mineral oil
  • VOC-content: approximately 82% w/w
  • Colour: Transparent light brown
  • Smell: Vanillla
  • Relative density at 20°C: 0.80 g/ml
  • Yield: 1.98 g/sec.
  • Vapour pressure at 20°C: 3 - 4 bar
  • Temperature resistance: -50°C to +200°C
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol can, maximum nominal volume 500 ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Instruction manuel

Before use, carefully read and observe the warning texts on the label!

Application:

  • Bring can to room temperature.
  • Operating temperature 5° to 30°C.
  • Shake can for 2 minutes before use.
  • Spray a thin coat and flash off. Optimum lubrication occurs once the solvent has evaporated.
  • After cleaning, an invisible protective film appears.

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order informations

 Color   Product   Bundle   Art.No. 
 2K Linemarker blau 500   500 ml   387067 
 2K Linemarker gelb 500   500 ml   387081 
 2K Linemarker rot 500   500 ml   387050 
 2K Linemarker weiß 500   500 ml   387043 
 Color   Product   Bundle   Art.No. 
 2K Super Klarlack hgl F/I 160   200 ml   04209 
 Color   Product   Bundle   Art.No. 
 2K Super Klarlack hgl. D 160   200 ml   369469 
 Color   Product   Bundle   Art.No. 
 2K Super Klarlack hgl. D 160   200 ml   369469 
 Color   Product   Bundle   Art.No. 
 2K Super Klarlack hgl. I 160   200 ml   365201 
 Color   Product   Bundle   Art.No. 
 3-D-Effekt Spray 150   150 ml   888946 
 Color   Product   Bundle   Art.No. 
 3-D-EFFEKT SPRAY glitter 150   150 ml   665578 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Multi Spray
Technical Information Multi Spray

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of: October 1, 2014
This release replaces all eventually earlier issued versions.

News

It runs like clockwork thanks to the new presto Penetrating Oil! Due to its high creeping ability, the powerful special oil penetrates into the finest...

Read more

Ideas

The presto repair box with PE esin, hardener, fibreglass cloth and fibreglass fleece offers everything you need for inexpensive but effective repairs...

Read more

Deko-Ideen im Advent zu verwirklichen macht Spaß und bringt Sie selbst in eine vorweihnachtliche Stimmung. Wem das klassische Tannengrün zu langweilig...

Read more