Technical Information Tar Spray

Technical Information Tar Spray

Lubricant and preservative on basis of Stockholm tar to prevent wear and sticking of screwed connections which are liable to heavy workload. Tar Spray gives lasting protection, is water-repellent and resistant to weather influences and weak acids and bases. MoTip Tar Spray has excellent adhesion and excellent corrosion prevention.

 

 

  •  

 

 

 

Quality and properties

  • Lasting protection
  • Water-repellent
  • Excellent adhesion
  • Prevents wear and sticking
  • Resistant to weather influences
  • Resistant to weak acids and bases
  • Excellent corrision prevention
  • Directed jetspray
  • 360° Valve

Physical and chemical data

  • Basis: Stockholm Tar
  • VOC-content: approximately 75% w/w
  • Colour: transparent brown
  • Smell: characteristic
  • Relative density at 20°C: 0.76 g/ml
  • Yield: 1 - 1,5 g/sec
  • Temperature resistant: -30 to + 180 °C
  • Vapour pressure at 20°C: 3 - 4 bar
  • Size:
    aerosol can, maximum nominal volume 500 ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Instruction manuel

Before use, carefully read and observe the warning texts on the label!

Application:

  • Bring can to room temperature.
  • Operating temperature 5° to 30° C.
  • Shake for 2 minutes before use.
  • Spray parts to be treated prior to assembly. After evaporation a protective film remains, which simplifies the futur disassembly.
  • The protective film can be removed with MoTip Industrial Cleaner.

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order informations

 Color   Product   Bundle   Art.No. 
 Teer- Spray 500ml   500 ml   090308 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Tar Spray
Technical Information Tar Spray

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of: October 01, 2014
This release replaces all eventually earlier issued versions.

News

DUPLI-COLOR Profi assortment is the perfect supplement for every craftsmen. It saves equipment, time and therefore a lot of money. DUPLI-COLOR Profi...

Read more

Ideas

Rostige Dekorationen liegen im Trend und sind nun mithilfe des Rosteffekt-Sprays von DUPLI-COLOR für Jeden selbst herzustellen.

Read more

Mit Grill, Kühlbox und Bastmatten geht es los zum Public Viewing. Wem das noch nicht langt, kann schnell noch die Grillkohlenverpackung einsprühen und...

Read more