Technical Information Cycling Shine & Protect

Technical Information Cycling Shine & Protect

High quality maintenance spray to clean, protect and obtain a lasting gloss. Suitable to treat all lacquered and carbon bicycle parts.

Applications: frame, fork and crank

Quality and properties

  • Antistatic
  • Water-repellent
  • Reduces the adhesion of dirt
  • Lasting gloss
  • Protects against weather influences
  • Contains silicones
  • User-friendly
    • Sprayable at any angle due to a 360° valve.

    Physical and chemical data

    • Basis of the binder: Polydimethylsiloxane
    • Colour: transparent
    • Smell: characteristic
    • Relative density at 20°C: 0,72 g/ml
    • Vapour pressure at 20°C: approx. 3 bar
    • Refractive Index at 25°C: 1,410
    • pH-value: neutral
    • Storage stability:
      10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
    • Size:
      aerosol cans, maximum nominal volume 400 ml

    Environment and labelling

    Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

    Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

    Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

    Instruction manuel

    Before use, carefully read and observe the warning texts on the label!


    • The surface should be dry.
    • The aerosol should have room temperature.
    • Best processing temperature 5 to 30°C.
    • Shake for 2 minutes before use.
    • Remove loose dirt.
    • Apply Shine & Protect in a thin, equal layer.
    • Allow to take effect for one minute and polish with a clean, dry cloth.

    Tips for spray painting

    Protect the object and the surrounding area from spray mist.
    Temperature should range between +10°C and +25°C, max. air humidity 60 %.

    Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!


    Order informations

     Color   Product   Bundle   Art.No. 
     Cycling Reinigung + Schutz 400   400 ml   000270 

    * no color identification possible
    The presentation of colors may deviate from the original color.
    For printing of the order information please press "printing preview/further products".

    Examples for use

    Technical Information Cycling Shine & Protect
    Technical Information Cycling Shine & Protect

    Disclaimer of liability

    This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

    For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

    As of: October 24, 2011
    This release replaces all eventually earlier issued versions.


    No news available.


    No news available.