Technical Information Contact Cleaner

Technical Information Contact Cleaner

Spray with high dissolving properties to clean electrical contacts. Contact cleaner is non-conductive and non-corrosive and leaves no residue. MoTip Contact Cleaner has a powerful jetspray and can be used in various positions.

For use on:
Car and motorbike wiring and contacts
Print boards, electrical circuits, printing plates, contacts, plugs, TV, radio, tools

Quality and properties

  • Powerful jetspray
  • High dissolving properties
  • Leaves no residue
  • Non-conductive
  • Non-corrosive
  • 360° valve

Physical and chemical data

  • Basis: Aliphatic Hydrocarbons with alcohol
  • VOC-content: approximately 97% w/w
  • Colour: transparent
  • Smell: characteristic
  • Propellant: carbon dioxide
  • Relative density at 20°C: 0.73 g/ml
  • Yield: 3.8 g/sec.
  • Refractive index at 20°C: 1.370
  • Vapour pressure at 20°C: 5.5 - 6.5 bar
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol can, maximum nominal volume 500 ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Instruction manuel

Before use, carefully read and observe the warning texts on the label!


  • Bring can to room temperature.
  • Operating temperature 5° to 30°C.
  • Switch off electronic and electrical equipment before use so that there is no current at all.
  • Shake for 2 minutes before use.
  • Spray the parts to be cleaned with MoTip contact cleaner.
  • After cleaning wait to all combustible solvent steam has disappeared (after 15 minutes at least).
  • Only then turn on equipment.

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!


Order informations

 Color   Product   Bundle   Art.No. 
 Kontaktreiniger 500   500 ml   090505 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Contact Cleaner
Technical Information Contact Cleaner

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of: October 1, 2014
This release replaces all eventually earlier issued versions.


The new unique DUPLI-COLOR NEXT spray lacquer ensures the easiest application and the highest reliability for a perfect spray result. The neutral...

Read more


Rostige Dekorationen liegen im Trend und sind nun mithilfe des Rosteffekt-Sprays von DUPLI-COLOR für Jeden selbst herzustellen.

Read more

Here you can make stylized leaf-pattern wall paintings. The trick: the leaves are not painted but sprayed with stencil technology. The brilliant white...

Read more