Technical Information Exhaust Assembly Paste

Technical Information Exhaust Assembly Paste

presto Exhaust Assembly Paste is a putty-like paste to seal joints in the field of exhaust systems, such as sleeves, terminals, clamps etc.

For the repair of wholes, cracks etc. in exhaust system we recommend presto Exhaust Repair Paste.

Quality and properties

  • Putty-like paste basing on water glass
  • For durable sealing of exhaust system parts
  • Quick and easy application
  • Ease of disassembling

Physical and chemical data

  • Basis: Water glass
  • Consistency: pasty
  • Colour: dark-grey
  • Smell: nearly without odour
  • Temperature resistance: up to approx. 700°C
  • Processing temperature:
    +5°C - +30°C, best results during room temperature
  • ph-value: 9.8
  • Density at 20°C: 1.68 kg/dm³ ± 0.02 kg/dm³
  • Solid content: 71 ± 1 %
  • Storage stability:
    12 monts if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    60 g and 170 g tube

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application:

  • The substrate has to be clean and fat free.
  • The paste can be applied generously onto the spots to be treated, then the parts can be assembled immediately.
  • Hardening will happen after starting the vehicle in the usual way by means of heating.
 

Order informations

 Color   Product   Bundle   Art.No. 
 presto Auspuff-Mont Paste 170g   170 g   603123 
 presto Auspuff-Mont.-Paste 60g   60 g   603130 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Exhaust Assembly Paste
Technical Information Exhaust Assembly Paste

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of August 24, 2010
This release replaces all eventually earlier issued versions.

News

It runs like clockwork thanks to the new presto Penetrating Oil! Due to its high creeping ability, the powerful special oil penetrates into the finest...

Read more

Ideas

Deko-Ideen im Advent zu verwirklichen macht Spaß und bringt Sie selbst in eine vorweihnachtliche Stimmung. Wem das klassische Tannengrün zu langweilig...

Read more

Porous material and holes up to 1 cm wide can easily be bridged or repaired in broken plastic using presto extra Fibreglass Filler.

 

Also suitable...

Read more