Technical Information 1K Epoxy Primer

Technical Information 1K Epoxy Primer

presto Epoxy primer is an all-purpose 1K primer that provides excellent adhesion and corrosion prevention on sheet steel, zinc-coated steel, aluminium and anodised aluminium. It is fast drying with good flow and can be applied wet-on-wet. It also offers good insulation against humidity.

It is best to pre-clean metal surfaces thoroughly with silicone remover.

Applications:
Spot repair and refinishing parts.

Quality and properties

  • Excellent adhesion and corrosion protection for steel, galvanized sheet steel, stainless steel,
  • Aluminum, anodized aluminum, polished old paint, Polyester putties, various plastics as well as fibreglass
  • Simple, time-saving application
  • Fast drying
  • Good flow
  • Recoatable with solvent and water based topcoats
  • Good insulation against moisture
  • Wet-on-wet application possible

Physical and chemical data

  • Basis of binder: Epoxy resin
  • Colour: grey
  • Smell: solvent
  • Efficiency: 1 m²
  • VOC value: 274,5g
  • Temperature resistance: to 90 °C
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    Aerosol cans, maximum nominal volume 400ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application

  • Remove all rust from metal surfaces
  • Clean surface with silicone remover, then sand
  • Shake the can well for 2 minutes
  • Carry out test spray
  • Damaged area must be free of grease, dust and dry
 

Order information

 Color   Product   Bundle   Art.No. 
 presto Epoxy-Grundierung 400   400 ml   502637 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information 1K Epoxy Primer
Technical Information 1K Epoxy Primer

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of April 25, 2019
This release replaces all eventually earlier issued versions.

News

MOTIP DUPLI recalls the "presto premium rim cleaner" (aerosol can, contents 400 ml, article number 455896) The technical composition of the product...

Read more

Ideas

The presto repair box with PE esin, hardener, fibreglass cloth and fibreglass fleece offers everything you need for inexpensive but effective repairs...

Read more

Mit Grill, Kühlbox und Bastmatten geht es los zum Public Viewing. Wem das noch nicht langt, kann schnell noch die Grillkohlenverpackung einsprühen und...

Read more