Technical Information Contact Spray

Technical Information Contact Spray

presto contact spray is the reliable way to avoid contact resistance, leakage current and voltage losses in electrical connections. It also ensures a smooth current.

Application areas:
electrial connections, radios, televisions, tools, cabling, connections

Quality and properties

  • Water and moisture are infiltrated and displaced
  • Excellent adhesion and penetration
  • Protects contacts and prevents corrosion
  • Resistant to water, salts and weak bases
  • Directed jet spray
  • This product is equipped with a special cap, which contains a tube and a spray nozzle that can be used to reach inaccessible places.
  • Observe TRG 300

Physical and chemical data

  • Colour: yellow/transparent
  • Propellant: propane/butane
  • Density at 20°C: 0,664 g/ml
  • Vapour pressure at 20°C: 4 - 4,5 bar
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol can, maximum nominal volume 400 ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!


  • Make sure can is at room temperature.
  • Application temperature 5 ° to 30 ° C.
  • Switch electrical equipment off before treating.
  • Surfaces must be clean, dry and free of grease.
  • Shake can well before use.
  • Spray several thin layers on connectors, cables, distributor caps, etc.


Order informations

 Color   Product   Bundle   Art.No. 
 Kontaktspray 150   150 ml   429910 
 Kontaktspray 400   400 ml   157141 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Contact Spray
Technical Information Contact Spray

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of March 12, 2014
This release replaces all eventually earlier issued versions.


No news available.


No news available.