Technical Information Anti-Welding Spray

Technical Information Anti-Welding Spray

presto Anti-Welding Spray prevents welding splatter from sticking to the welding and surrounding area.

Quality and properties

  • Non combustible
  • Silicone free
  • Slightly alkaline, surplus spray can be removed with waterand can be coated afterwards
  • High spreading rate
  • Non-corrosive
  • Misty spray
  • 360° valve allows application from every position
  • TRG 300 compliant

Physical and chemical data

  • Basis: Emulsifying Oil
  • Colour: white-transparent
  • Relative density at 20°C: 1.0 g/ml
  • Yield: 2.7 g/sec.
  • Vapour pressure at 20°C: 8 - 9 bar
  • Residual pressure: approx. 3 bar
  • pH-value: 8.5 - 9.5
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol can, maximum nominal volume 300 ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application:

  • Bring can to room temperature.
  • Operating temperature 5° to 30°C.
  • Shake can for 2 minutes before use.
  • Spray parts in need of protection and carry out welding work.
  • Remove welding splatter with a steel brush.
  • Remove surplus spray with water or a damp cloth. 

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Order informations

 Color   Product   Bundle   Art.No. 
 presto Schweiß-Trennspray 300   300 ml   211898 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Anti-Welding Spray
Technical Information Anti-Welding Spray

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of April 4, 2011
This release replaces all eventually earlier issued versions.

News

It runs like clockwork thanks to the new presto Penetrating Oil! Due to its high creeping ability, the powerful special oil penetrates into the finest...

Read more

Ideas

Die Adventszeit steht kurz bevor und somit stellt sich auch wieder die alljährliche Frage nach einem Adventskalender um die Wartezeit bis Weihnachten...

Read more

Achtung, es wird schaurig! Fledermäuse fliegen und einsame Hände halten Kerzen: Halloween kann kommen! Um den typischen orange/ schwarzen Grusellook...

Read more