Technical Information Tar and Resin Remover

Technical Information Tar and Resin Remover

presto Tar and Resin Remover reliably but gently removes tar, bitumen, oil, grease and wax from lacquer and chrome.

Quality and properties

  • Powerful cleaner
  • PH neutral
  • User friendly

Physical and chemical data

  • Basis: Aliphaton tenside
  • Basis: transparent
  • Relative density at 20°C: 0.691 g/ml
  • Vapour pressure at 20°C: 3 - 4 bar
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol can, maximum nominal volume 400 ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!


  • Bring can to room temperature.
  • Operating temperature 15 to 25°C.
  • Shake can before use
  • Apply tar remover and leave to work for a few minutes.
  • Remove dirt with a soft cloth.
  • Unsuited for longer use on one-component coatings.

Order informations

 Color   Product   Bundle   Art.No. 
 Teer- und Harz-Entferner 150   150 ml   429934 
 Teer- und Harz-Entferner 400   400 ml   306215 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Tar and Resin Remover
Technical Information Tar and Resin Remover

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of December 17, 2009
This release replaces all eventually earlier issued versions.