Technical Information Assembly Cleaner

Technical Information Assembly Cleaner

presto assembly cleaner is a highly effective rapid cleaner for the maintenance, repair and installation of machinery, vehicles, precision mechanical and tools. It dissolves old and hardened oil and fat residues as well as remnants of brake fluid and silicone. The cleaner serves as pre and basic cleaning and degreases all sliding surfaces and parts prior to the application of special lubricants.

Qualität und Eigenschaften

  • High solvency power
  • Leaves no residue
  • Non-conductive
  • Non-corrosive
  • Removes tough oil and grease 
  • Powerful directed jet spray
  • Can be sprayed from any angle due to a special 360 ° valve.
  • Observe TRG 300

Physical and chemical data

  • Basis: Aliphaton
  • Colour: transparent
  • Smell: aliphatic
  • Density at 20°C: 0,67 g/ml
  • Yield: 3-4 g/sec.
  • Vapour pressure at 20°C: 5,5 - 6,0 bar
  • Propellant: carbon dioxide
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol can, maximum nominal volume 500 ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application :

  • Make sure can is at room temperature.
  • Application temperature 5 ° to 30 ° C.
  • Cover painted and plastic parts.
  • Shake can well before use.
  • Spray the parts to be treated until the dirt disappears.

Order informations

 Color   Product   Bundle   Art.No. 
 Montagereiniger-Spray 500   500 ml   157196 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Assembly Cleaner
Technical Information Assembly Cleaner

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of December 17, 2009
This release replaces all eventually earlier issued versions.