Technical Information Brake Cleaner barrel

Technical Information Brake Cleaner barrel

presto Brake Cleaner is suited for removing oil, grease, dirt, brake fluid from brake drums, pads, discs, lines, cylinders and clutch parts.

It prevents brakes from squeaking and cleans engines, machines and other parts thoroughly without leaving a residue.

Quality and properties

  • High solvent power
  • acetone-free
  • free from aromatic compounds
  • Leaves no residue
  • Safe for use on o-rings and brake hoses
  • Special chemical composition
  • powerful degreasing 
  • Contains no chlorinated hydrocarbons
  • Dries quickly leaving no residue
  • Non corrosive
  • Non conductive

Physical and chemical data

  • Basis: Aliphatic Hydrocarbons
  • Colour: transparent
  • Smell: characteristic
  • Storage stability:
    5 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) in original closed package
  • Size:
    5 L can, 20 L can, 60 L barrel

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

Application:

  • Operating temperature 5° to 30°C.

  • Fill brake cleaner in a pump sprayer or apply on cloth.

  • Evenly spray onto the surface to be treated or rub in, till the dirt is dissolved.

  • Use a brush on stubborn dirt.

  • Alternatively the parts can be dipped or cleaned with brush. After cleaning the parts must dry on air or wipe off with a clean cloth.

  • Turn off conducting parts and electrical equipment before application and turn on approx. 15 minutes after treatment (brake cleaner contains flammable solvents).

  • May not reach directly in the waste water; separation over oil separators 

 

Order informations

 Color   Product   Bundle   Art.No. 
 Bremsenreiniger 20L = 14,20kg   20 L   313134 
 Bremsenreiniger 5L = 3,55kg   5 L   313127 
 Bremsenreiniger 60L = 42,60kg   60 L   313141 
printing preview/further products

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Brake Cleaner barrel
Technical Information Brake Cleaner barrel

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of July 4, 2011
This release replaces all eventually earlier issued versions.