Technical Information Compressed-Air Spray
presto Compressed-Air Spray remove easily, with high pressure, dust and lose dirt from places which are hard to reach.
For use on:
- audio- and video equipment
Quality and properties
- very effective
- leaves no residue
- strong, directional spray
Physical and chemical data
- Basis: propane/butane
- Smell: indorous
- Propellant: carbon dioxide
- Relative density at 20°C: 0.55 g/ml
- Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
aerosol can, maximum nominal volume 400 ml
Environment and labelling
Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse".
Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,
- Bring can to room temperature.
- Operating temperature 5° to 30°C.
- Switch off electronic and electrical equipment before use so that there is no current at all.
- Spray judge on the sureface to be cleanded and spray in short burste.
- During treatment keep the can vertical.
- When the pressure falls interrupt the application, so that the pressure can build again.
- After treatment wait to all the comustible ingredients are vaporized (after 15 minutes at least)
|presto Druckluftspray 400||400 ml||258312|
* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".
Examples for use
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.
For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.
As of April 25, 2012
This release replaces all eventually earlier issued versions.