Technical Information Glue Glue for both permanent and temporary adhesion. Suitable to glue paper, cardboard, wood, textile and various types of plastic. Glue is fast drying and user-friendly. For a permanent adhesion treat both parts to be glued, allow to dry and firmly press together. For a temporary adhesion treat one of the parts to be glued, allow to dry and firmly press together. For use on: Carpet, cork, rubber, foam rubber, paper, cardboard, textiles, leather, metal, wood, numerous plastics and films Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties Suitable to glue large surfaces Fast drying User-friendly Spray pattern about 10 centimetre wide Physical and chemical data Basis: synthetic resin VOC-content: approximately 83% w/w Colour : white-transparent Smell: characteristic Relative density at 20°C : 0.75 g/ml Yield : 1.2 g/sec. Vapour pressure at 20°C : 3 - 4 bar Heat resistant: up to 80°C Drying time (at 20°C, 50% relative air humidity): Drying time: 2 - 5 minutes Glue time / active time: max. 45 minutes The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol can, maximum nominal volume 500 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Instruction manuel Before use, carefully read and observe the warning texts on the label! Application: Bring the can to room temperature. Operating temperature 5° to 30°C. Surface should be clean, dry and free of grease. Shake the can for 2 minutes before use. Spray at a distance of ca. 25-30 cm – further for polystyrene foam (Styropor®). Long-lasting adhesion: apply adhesive to both sides. After 15-20 minutes drying time, press the surfaces together. Temporary adhesion: Apply a thin even amount to the material and press them together after 5 -10 minutes. Apply more to extra absorbent materials. Press both pieces of material together till the adhesive dries. After use, turn can upside down and spray empty to clean the valve. Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 1, 2014 This release replaces all eventually earlier issued versions.
Technical Information Vaseline Spray Universal, transparent, lubricant and preservative with excellent adhesion. Vaseline spray is water-repellent, pH-neutral and resistant to weather influences and weak acids and bases. Vaseline spray has excellent corrosion prevention and prevents wear and sticking. MoTip Vaseline Spray is resistant to temperatures of - 30°C up to + 160°C. For use on: Antennae, plug-in connections and bolted connections and locks Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties Water-repellent Excellent adhesion Prevents wear and sticking Can be used in the food industry Resistant to weather influences Resistant to weak acids and bases Excellent corrision prevention Misty spray pattern Physical and chemical data Basis: Vaseline VOC-content: approximately 85% w/w Colour : white Smell: characteristic Relative density at 20°C : 0.89 g/ml Yield : 1.11 g/sec. Vapour pressure at 20°C : 3 - 4 bar 4 Ball EP-test (AS TM D 2596): 3136 N 4 Ball Wear-test (AS TM D 2266): < 0,4 mm Drop point: 42°C to 60°C Temperature resistance: -30°C to +160°C pH-value: neutral Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol can, maximum nominal volume 500 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Instruction manuel Before use, carefully read and observe the warning texts on the label! Application: Bring spray to room temperature. Operating temperature 5° to 30°C. Shake can for 2 minute before use. Spray onto the parts to be treated. Optimum lubrication occurs once the solvent has evaporated. Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 1, 2014 This release replaces all eventually earlier issued versions.
Technical Information Penetrating Oil Effective tool to loosen rusted part. Penetrating oil has good penetrating properties and contains graphite and MoS2. Penetrating oil is moisture repellent and rust preventive. MoTip Penetrating Oil has a powerful jetspray and can be used in various positions. For use on: Hinges, fittings, bolted connections, locks, bolts, nuts, tools, chain etc. Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties Good penetrating properties Contains graphit and MoS2 Moisture repellent Corrision preventive Powerful jetspray 360° valve Physical and chemical data Basis: mineral oil, graphite and molybdenum sulphide VOC-content: approximately 70% w/w Colour: graphite /black Smell: characteristic Relative density at 20°C: 0.86 g/ml Yield : 2.33 g/sec. Vapour pressure at 20°C : 3 - 4 bar Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol can, maximum nominal volume 500 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Instruction manuel Before use, carefully read and observe the warning texts on the label! Application: Bring can to room temperature. Operating temperature 5° to 30°C. Remove loose rust with a wire brush. Shake can for 2 minutes before use. Spray parts and leave to take effect. Starts working in most cases within 5 to 15 minutes, depending on the ability of the product to penetrate. Dirt and rust can already be removed from stuck parts after 5 minutes. Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 1, 2014 This release replaces all eventually earlier issued versions.
Order informations Glue Glue for both permanent and temporary adhesion. Suitable to glue paper, cardboard, wood, textile and various types of plastic. Glue is fast drying and user-friendly. For a permanent adhesion treat both parts to be glued, allow to dry and firmly press together. For a temporary adhesion treat one of the parts to be glued, allow to dry and firmly press together. For use on: Carpet, cork, rubber, foam rubber, paper, cardboard, textiles, leather, metal, wood, numerous plastics and films Order informations There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 1, 2014 This release replaces all eventually earlier issued versions. back
Order informations Penetrating Oil Effective tool to loosen rusted part. Penetrating oil has good penetrating properties and contains graphite and MoS2. Penetrating oil is moisture repellent and rust preventive. MoTip Penetrating Oil has a powerful jetspray and can be used in various positions. For use on: Hinges, fittings, bolted connections, locks, bolts, nuts, tools, chain etc. Order informations There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 1, 2014 This release replaces all eventually earlier issued versions. back
Order informations Shock Oil Effective tool to loosen rusted parts. As a result of the fierce decrease in temperature to –30°C and the lubricating properties of shock oil, the screwed connection can be loosed. MoTip Shock Oil has excellent lubricating properties and a directed jetspray. Order informations There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: October 1, 2014 This release replaces all eventually earlier issued versions. back
Glue Glue for both permanent and temporary adhesion. Suitable to glue paper, cardboard, wood, textile and various types of plastic. Glue is fast drying and user-friendly. For a permanent adhesion treat both parts to be glued, allow to dry and firmly press together. For a temporary adhesion treat one of the parts to be glued, allow to dry and firmly press together. For use on: Carpet, cork, rubber, foam rubber, paper, cardboard, textiles, leather, metal, wood, numerous plastics and films Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use
Penetrating Oil Effective tool to loosen rusted part. Penetrating oil has good penetrating properties and contains graphite and MoS2. Penetrating oil is moisture repellent and rust preventive. MoTip Penetrating Oil has a powerful jetspray and can be used in various positions. For use on: Hinges, fittings, bolted connections, locks, bolts, nuts, tools, chain etc. Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use
Technical Information Assembly Grease Metal free grease with high thermal stability to prevent clenching of brake systems. Brake assembly grease is resistant to chemicals, weather influences, water, salt and weak acids and bases. Brake assembly grease has excellent adhesion and a directed jetspray. MoTip Brake Assembly Grease is extremely suitable to mount brake systems and simplifies the future removal. Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Quality and properties High thermal stability Resistant to chemical and weather influences Resistant to water, salt and weak acids and bases Excellent adhesion Prevents wear and sticking Extremely suitable to mount brake system Directed jetspray Simplifies the future removal Physical and chemical data Basis: EP-2 Grease VOC-content: approximately 86% w/w Colour: white Smell: characteristic Relative density at 20°C: 1.11 g/ml Yield: 1.5 g/sec. Vapour pressure at 20°C: 3 - 4 bar Appearance: pasty Temperature resistance: -30°C to +180°C Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol can, maximum nominal volume 500 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Instruction manuel Before use, carefully read and observe the warning texts on the label! Application: Bring can to room temperature. Operating temperature 5° to 30°C. Cover coated and plastics parts. Shake for 2 minutes before use. Clean areas to be treated of moisture, dirt and grease. Before assembling brake parts, spray them evenly and then leave to dry. (Anti-squeak spray can be removed with MoTip brake cleaner.) Make sure not to spray brake discs and blocks! Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: November 2, 2011 This release replaces all eventually earlier issued versions.