1. Environmentally compatiple
MOTIP DUPLI sprays are 100 % free of heavy metals and, since 1977, have been containing CFC-free propellants. The caps are made of recyclable material. All MOTIP DUPLI products comply with the latest international labelling regulations and approval criteria.
Only the completely empty can should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made.
3. Recommendation for an optimum use of our products
Keep dry. Protect against solar radiation or other sources of heat. Use during dry weather in areas protected from the wind. Spray in a well ventilated area. Where possible apply at temperatures between +10°C and +27°C. Protect the car and the surrounding against spray mist.
4. Advice for spraying lacquer
When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.
These application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.