AEROSOL ART For numerous application possibilities. Special spray system, which is even used by famous graffiti artists. A broad range of the best-selling colours, mainly matching to RAL. Also available as clear coat. Suitable for wood, metal, paper, glass or paintable hard plastics as well as for many textiles. Also applicable for the designing of finery, concrete and natural stone. Data sheet Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks Examples for use
Citrus Cleaner High quality citrus cleaner to remove grease, tar, oil, wax, ink, resin, stickers and residues of glue from parts of treated and untreated metal, wood, stone and various types of plastic. It has high dissolving properties and is non-corrosive. Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use
Auto Paint Repair Guide Part 1 "Repairing holes and deep damages in metal parts"
Technical Information DC Grip+ Modified acryl-resin based lacquer with anti-slip particles and transparent satin finish. Increases the grip on slippery surfaces, even caused by humidity and reduces the risk to fall. Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks Quality and properties Increases the safety conditions (e.g. on stairs or bathroom floors) Good adhesion on concrete, asphalt, tiles, wood, metals, linoleum and most plastics Easy application due to an upside-down valve Resistant to chlorine water and saltwater Fast-drying For outdoor and indoor areas transparent mat Physical and chemical data Basis of the binder: modified acryl-resin based lacquer Colour: transparent mat Smell: solvent Degree of gloss (at measurement angle 60° acc. to DIN 67530): mat: 13 gloss units Efficiency: Depending on the consistence of the ground: 400 ml are sufficient up to 1,6 m² (the required anti-slip effect works at a layer thickness of approx. 80µm. Because of that the indication of efficiency refers to 2 applied layers) Drying time (at 20°C, 50% relative air humidity): Dust-dry: after approx. 5 minutes Dry to touch: after approx. 30 minutes Coatable: after 1-2 hours Walkable/ resilient: after 24 hours The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. Temperature-resistance (of the coating): 80°C Storage stability: Durability 10 years, if appropriate storage provided (temperature 10°-25°C, relative air humidity max. 60%) Size: aerosol cans with maximum nominal volume 400 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Using instructions The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label. Before use, carefully read and observe the warning texts on the label! Application Before use, carefully read and observe the warning texts on the label! Use at 15-25°C temperature. The surface has to be clean, dry and free from grease. Shake can vigorously for 2 minutes and apply on a test area. Turn the spray can for upside-down application. Apply several layers (to achieve the required anti-slip-effect, at least 2 layers are needed). Wait 5 minutes between each spraying. Use masking tape if necessary. Structure depends on spray distance and number of layers. Apply new layers when grip effect is reduced by natural wear and tear. Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations Color Product Bundle Art.No. DC ANTI-SLIP SPRAY 400 400 ml 419096 printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of October 18, 2016 This release replaces all eventually earlier issued version
Technical Information 2K Spray Putty Two component spray putty on basic of polyester for filling of large sand scratches, pores and other unevenness at the same time. Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks Quality and properties ColorMatic 2K spray putty is perfect for filling pores and other imperfections as well as rough sanding scratches at the same time Compared to conventional putties, it lets you continue with your work quickly For use on bare steel, on old paint layers and glass-reinforced plastic Not for use on thermoplastic acrylates ColorMatic 2K spray putty can be diluted up to 5% with a nitro thinner. The dry film will become more flexible Physical and chemical data Basic: Polyester resin with mineral filler material Colour: beige Smell: Styrol Form: soft, thixotrop Pot life/workability time at 20°C: 20-30 minutes Drying time (at 20°C, 50% relative air humidity): Grindable after approx. 120 minutes Flash point: approx. 33°C (putty); for hardener not applicable Coat thickness: 500 to 800 µ Concentration at 20°C: Putty material 1,8 kg/dm³ Hardener 1,15 g/cm³ Hardener addition: 3-3,5% Temperature-resistant of the cured material: to 160°C Storage stability: 9 month if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) in unopened bundle. Protect from direct sunlight, frost and humidity. Size: Putty material: small ring cans Hardener: plastic tubes Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Using instructions Before use, carefully read and observe the warning texts on the label! Rust should be removed from the surface to be levelled and it should be clean, dry, and free of grease Take the required amount of material from the pack and mix thoroughly with the appropriate amount of hardener according to the specified ratio Apply with a spray gun only Spraying several layers is possible without sanding in between Spray pressure: 2-4 bars Nozzle size: 1.8 to 3.00 mm. Clean equipment immediately after use, wash off putty with nitro thinner if necessary Do not put the mixture back in the tin. Before applying the top coat, paint with a 2K primer e.g. ColorMatic 2K hi-speed primer filler no. 190 315 to avoid blisters Note: Do not apply directly onto galvanized surfaces. Apply a suitable zinc primer beforehand such as ColorMatic 1K primer for zinc no. 190285 The surface can be drilled into, sanded, sawed, filed and painted after about 20 minutes. 3-3,5% drying time 20°C=120 min pot life 20°C =20-30 min P180-240 Order information Color Product Bundle Art.No. CMP Spritzfüller 1500g 1,500 KG 702525 printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of May 4, 2011 This release replaces all eventually earlier issued versions.
Technical Information Wet Leak Finder Available now! White powder spray for locating leaks of oil, fuel or other liquids. Enables the exact location of leaks in the body, radiator, engine block, transmission housing, power steering, fuel lines, pipes, pumps, etc. Easy to remove after use. For use on: For inspection of engines, gearboxes, pumps, tanks, pipes and other parts through which liquid passes. Available colours/order numbers Search dealer for this product Safety Data Sheet 1 Stepwise Manual General Remarks Quality and properties Grease and silicone free High temperature resistant Non-flammable after evaporation of solvents and propellants High yield Easy and quick application Facilitates troubleshooting Does not attack paints, rubber and plastics Physical and chemical data Basis: Talc Colour : white Smell : characteristic Appearance: floury, powdery VOC value: 96% / 566 g/l Relative density at 20°C : 0.81 g/ml Yield : 2.0 g/sec. Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) Size: aerosol can, maximum nominal volume 400 ml Environment and labelling Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material. Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, Using instructions Before use, carefully read and observe the warning texts on the label! Application: Bring the can to room temperature. Working temperature 5° to 30°C. Shake the can for 2 minutes before use. The area to be tested should be clean and dry. Apply the spray to the suspected zone to detect the leakage. Spray distance approx. 25 cm. Spray on evenly and allow to flash off well. Leaks become clearly visible on the powder layer that forms. Tips for spray painting Protect the object and the surrounding area from spray mist. Temperature should range between +10°C and +25°C, max. air humidity 60 %. Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels! Order informations Color Product Bundle Art.No. Feuchtleckfinder 400 400 ml 529832 printing preview/further products * no color identification possible The presentation of colors may deviate from the original color. For printing of the order information please press "printing preview/further products" . Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of: February 09, 2021 This release replaces all eventually earlier issued versions.
Order informations Carburettor Cleaner High quality cleaner for the interior and the exterior of carburettors and valves, without disassembly. Order informations There are no prdocuts to show. Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of November 23, 2020 This release replaces all eventually earlier issued versions. back
Carburettor Cleaner High quality cleaner for the interior and the exterior of carburettors and valves, without disassembly. Data sheet Available colours/order numbers Search dealer for this product Stepwise Manual General Remarks Examples for use
Dealer search is not available for location "INTERNATIONAL". Please choose another location.
Order informations CEMENT LOOK Grey is currently THE trend colour for house and apartment design. Especially shower walls, floors, living walls and much more is currently being designed with exposed concrete, micro-cement or other concrete-look coverings. Small accessories, such as vases or soap dispensers, in the same look, complement these rooms perfectly. Here you will achieve fast and optimal results with our new DUPLI-COLOR CEMENT series. For applications on all kinds of surfaces. Depending on layer thickness, it is possible to achieve different drying-contures, like real cement. By spraying a last fine mist, it´s even possible to achieve a mineral feel. Please use mat clear coat for outdoor using. Available in Hoover dark and Assuan light. Order informations Color Product Bundle Art.No. CEMENT LOOK Assuan light 400 400 ml 521621 CEMENT LOOK Hoover dark 400 400 ml 521638 Examples for use Disclaimer of liability This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols. For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m. As of January 7, 2010 This release replaces all eventually earlier issued versions. back