Technical information 1K Primer for Alu

Technical information 1K Primer for Alu

Specific additives enable ColorMatic 1K primer for alu to provide excellent adhesion and corrosion protection, especially on bare aluminium surfaces. It is specially formulated for refinishing OEM-plated aluminium car bodies and is fast drying.
Befor working with ColorMatic 1K primer for alu, treat surface with ColorMatic Silicone remover no. 174469. For best results, we recommend using the ColorMatic 2K hi-speed primer once the 1K primer for alu has dried. You can then paint with ColorMatic Rim Spray or with mixed paints from our water-based or solvent-based mixing systems.


Applications:
Ideal for spot repairs and refinishing parts.

Quality and properties

  • Excellent adhesion and corrosion protection especially on bare aluminium surfaces
  • Specially formulated for refinishing OEM-plated aluminium car bodies
  • Simple, time-saving application
  • Fast drying time
  • Recoat with ColorMatic pre-fill water-based paints and solvents, and 1K and 2K topcoats

Physical and chemical data

  • Basis of binder: specific mixture of resi
  • Colour: light grey
  • Smell: solvent
  • Efficiency:
    1 m²
  • Substrate:
    bare Aluminium, sanded through areas on aluminium substrates
  • Temperature resistance: to 90°C
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    Aerosol cans, maximum nominal volume 400 ml
  • VOC value: 259,3g

Environment and labelling

Environmentally sound: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by  MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200  and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

Before use, carefully read and observe the warning texts on the label!

  • Clean surface thoroughly and sand
  • Damaged area must be dry and free of dust and grease
  • Clean undercoat with ColorMatic silicone remover no. 174 469
  • Shake the can well for 2 minutes
  • Carry out test spray

  • For professional use only
  • Wear appropriate respirator (recommended type A2/P3)
Technical information 1K Primer for Alu
2 min
Technical information 1K Primer for Alu
Primer 1-2
= 20-30 µ
Technical information 1K Primer for Alu
to top-coat
20°C=15 min
Technical information 1K Primer for Alu
5-8 min
Technical information 1K Primer for Alu
variable
Technical information 1K Primer for Alu
Technical information 1K Primer for Alu
approx. 15 cm
Technical information 1K Primer for Alu
20°C=15 min
 
 
 
 
 

Order information

* kleuridentificatie niet mogelijk
De weergegeven kleuren wijken mogelijk af van de originele kleuren.
Om de productgegevens af te drukken, klik op "printing preview/further products".

Products: The subpart part marker ###ITEM_LIST_EMPTY### or the template file EXT:snet_tmpl_motip/Resources/Private/Templates/Extensions/tt_products/products_template_en.tmpl has not been found.

Examples for use

Technical information 1K Primer for Alu
Technical information 1K Primer for Alu

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of July 23, 2010
This release replaces all eventually earlier issued versions.

NIEUWS

Vorig jaar vond de opening van ons Experience Center in Wolvega plaats. Deze nieuwe locatie aan de overkant van het hoofdkantoor in Nederland is de...

Meer lezen

IDEEËN

Hier kunt u gestileerde muurschilderingen in blad-patroon maken. De truc: de bladen worden niet geschilderd maar erop gespoten met stencil...

Meer lezen

Moderne stijl in gesofisticeerde en trendy kleurtjes – perfect voor speciale gelegenheden.

Meer lezen