Technical Information Plastic Cleaner
ColorMatic Kunststof reiniger is een grondige en betrouwbare reiniger voor alle kunststof auto onderdelen, zowel exterieur (bijv. bumpers) als interieur (bijv. dashboard). Het is ook geschikt voor glad leer en vinyl. Het verwijdert hardnekkig vuil, vet, olie, siliconen, was, teer, lijmresten enz. Het biedt een hoge reinigingskracht en is daarom de beste manier om een goede hechting voor de daaropvolgende coating te garanderen.
Toepassing:
Ideaal voor spotrepair en het reinigen van kunststof onderdelen
Physical and chemical data
- Basis of the binder: solvent
- Colour: transparent
- Smell: solvent
- Efficiency:
very efficient - Substrate:
Plastic for interior and exterior - Storage stability:
10 years if appropriate storage provided (=10° - 25°C, relative air humidity of max. 60%) - Size:
Aerosol cans, maximum nominal volume 400 ml - VOC value: 300g
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Application
- 1-2 light coats, repeat if dirt excessive
- Wipe off with a clean, dry non-woven cloth
- Allow cleaned surfaces to dry completely
- Shake can shortly before use
- For professional use only
- Wear an appropriate respirator (we recommend A2/P3)
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of July 19, 2010
This release replaces all eventually earlier issued versions.