Technical Information Wood Cleaner Anti-Grey
Physical and chemical data
- Basis of the binder: Water-based
- Smell: neutral
- Degree of gloss (at measurement angle 60° acc. to DIN 67530):
not relevant - Efficiency:
500 ml are sufficient for 4 m² - Drying time (at 20°C, 65% relative air humidity):
Coatable after min. 48 hours
The drying time depends on surrounding temperature, air humidity and absorpitivity of the wooden ground. - Storage stability:
5 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
Do not store below 5°C - Size: plastic container with 500 ml
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
- Remove rough and loose dirt.
- Wear protective gloves.
- Wet the wooden area you wish to work on.
- Cover generously areas which shall not be treated, especially metals or plants, for example with painters foil.
- Apply the Wood Cleaner richly with a sponge or a cloth and brush it in with a hard brush in direction of the fiber.
- After 15 minutes of reaction time remove the solved greying by using a hard brush or a non-woven web (no steel-wool) and plenty of water in direction of the fiber.
- Thoroughly let dry (at least 2 days during dry and warm weather).
- We recommend to protect the wood afterwards with a DUPLI-COLOR Wood Lasure.
- Clean the tools during and after work with water
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of March 14, 2018
This release replaces all eventually earlier issued versions.
