Technical Information Polyester Fine Filler "styrene-free"

Technical Information Polyester Fine Filler "styrene-free"

Highly elastic, 2-component polyester fine filler to fill small unevennesses and for the "fine-filling" of pre-treated surfaces. Applicable on metal, wood, concrete and on repair spots which are filled with presto Body Filler. Micro-fine filling components result in a very smooth surface.


For universal use on many materials in the entire car, construction, and hobby sector. 

For preparation and finishing your filling job, we recommend our presto sand papers. We offer a wide assortment of fine and coarse papers for dry and wet sanding.

Quality and properties

  • Composition of highly-reactive, unsaturated polyester resin, filled with a new, micro-fine pigment-filler-combination
  • Results in a very smooth surface
  • Ease of working
  • Easy to sand
  • Very good adhesion
  • Free of asbestos and silicone
  • Resistant to weak acids and bases, propellants, solvents, water and de-icing salt

Physical and chemical data

  • Basis: polyester resin with a pigment-filler-combination
  • Colour: white
  • Smell: characteristic
  • Consistence: soft, thixotropic, pasty
  • Pot life / Working time at 20°C: approx. 7 - 8 minutes
  • Working temperature: min. 12°C
  • Drying time (at 20°C, 50% relative air humidity):
    can be sanded after approx. 30 - 40 minutes
  • Flash point:
    approx. 33°C (resin); not applicable for hardener
  • Density at 20°C:
    putty 1.7 g/cm³
    hardener 1.15 g/cm³
  • Addition of hardener: 2 - 4 % (optimal mixture 2,5 %)
  • Temperature resistance of the cured material: 120°C
  • Storage stability:
    18 months if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) in the unopened original container. Protect from direct sunlight, frost and humidity.
  • Packing:
    small ring tins; hardener: plastic tubes 

Environment and labelling

Environmentally sound: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by  MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200  and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Application

  • The object you wish to repair should be de-rusted, clean, dry, fat-free and sanded.
  • Take the requested portion of putty compound out of the can and mix it well with the corresponding quantity of hardener.
  • Apply the mixed material in the desired layer thickness. If necessary sand with wet sand paper (grain400)
  • Clean tools immediately after use, if necessary with a nitro thinner.
  • Do not return mixed material into the can.
  • After approx. 30 - 40 minutes the repaired spot can be drilled, sanded, sawed, rasped and painted.
  • Already after one-time sanding with wet sand paper (400) it is possible to apply the paint. presto Fine Filler is very elastic and constantly easy to sand.
  • The filling compound can be applied to surfaces with low temperatures (minimum +5°C). The filler itself should have room temperature.
  • Advise: do not apply directly on zinc-plated surfaces; these have to be primed before with a suitable zinc primer.
 

Order informations

* kleuridentificatie niet mogelijk
De weergegeven kleuren wijken mogelijk af van de originele kleuren.
Om de productgegevens af te drukken, klik op "printing preview/further products".

Products: The subpart part marker ###ITEM_LIST_EMPTY### or the template file EXT:snet_tmpl_motip/Resources/Private/Templates/Extensions/tt_products/products_template_en.tmpl has not been found.

Examples for use

Technical Information Polyester Fine Filler "styrene-free"
Technical Information Polyester Fine Filler "styrene-free"

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of March 8, 2016
This release replaces all eventually earlier issued versions.

NIEUWS

Vorig jaar vond de opening van ons Experience Center in Wolvega plaats. Deze nieuwe locatie aan de overkant van het hoofdkantoor in Nederland is de...

Meer lezen

IDEEËN

Met de ijzerhoudende DUPLI-COLOR Magnetic Paint voorkom je gaatjes door spijkers en resten van tape op je muren. De clou: je kan zelfs over de...

Meer lezen

Kapotte randen kunnen snel weer aan elkaar gelijmd worden met de presto Bodyfiller, voor een langdurige stabiliteit.

 

Ook geschikt voor gebruik op:...

Meer lezen