Technical Information Glass Fibre Filler

Technical Information Glass Fibre Filler

presto Glass Fibre Filler is a 2-component polyester putty containing the new adhesion promoter NT. The putty is a mixture of pure, unsaturated polyester resin and glass fibre particles. Applicable in industry and DIY sector for bigger damages, which are perforated by corrosion and which are exposed to special mechanical stress. Suitable for application on metal, wood, concrete and many plastics etc.

To bypass and to stabilise perforations, to fill bigger unevennesses. Suitable for the repair of perforations up to a diameter of 12 mm.

Localized corrosion holes bigger than 12 mm diameter should be filled with the prestolith special Repair Box.

For preparation and finishing your filling job, we recommend our presto sand papers. We offer a wide assortment of fine and coarse papers for dry and wet sanding.

Quality and properties

  • The new developped adhesion promotor NL grants a very good adherence.
  • The elastic resin allows use even on surfaces, which are exposed to friction and extension
  • Ease of working
  • Easy to sand
  • Very good adherence
  • Free of asbestos and silicone
  • Short curing time
  • Resistant to weak acids and bases, propellants, solvents, water and de-icing salt

Physical and chemical data

  • Basis: polyester resin with mineral fillers and glass fibre particles
  • Colour: grey-green
  • Smell: styrol
  • Consistence: soft, thixotropic, pasty
  • Pot life / Working time at 20°C: approx. 5 - 6 minutes
  • Working temperature: min. 12°C
  • Drying time (at 20°C, 50% relative air humidity):
    can be sanded after approx. 30 minutes
  • Flash point:
    approx. 32°C (resin); not applicable for hardener
  • Density at 20°C:
    putty 1.46 g/cm³
    hardener 1.15 g/cm³
  • Addition of hardener: 2 - 4 % (optimal mixture 2,5 %)
  • Temperature resistance of the cured material: 120°C
  • Storage stability:
    18 months if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) in the unopened original container. Protect from direct sunlight, frost and humidity.
  • Packing:
    small ring tins; hardener: plastic tubes 

Environment and labelling

Environmentally sound: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by  MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200  and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Application

 

  • The object you wish to repair should be de-rusted, clean, dry, fat-free and sanded.
  • Take the requested portion of putty compound out of the can and mix it well with the corresponding quantity of hardener.
  • Apply the mixed material in the desired layer thickness.
  • Clean tools immediately after use, if necessary with a nitro thinner.
  • Do not return mixed material into the can.
  • After approx. 20-30 minutes the repaired spot can be drilled, sanded, sawed, rasped and painted.
  • To prepare the subsequent painting we recommend to egalise the surface with prestolith plastic Body Filler (art.no. 600054) or with prestoflex Polyester Fine Putty (art.no. 601211).
 

Order informations

* kleuridentificatie niet mogelijk
De weergegeven kleuren wijken mogelijk af van de originele kleuren.
Om de productgegevens af te drukken, klik op "printing preview/further products".

Products: The subpart part marker ###ITEM_LIST_EMPTY### or the template file EXT:snet_tmpl_motip/Resources/Private/Templates/Extensions/tt_products/products_template_en.tmpl has not been found.

Examples for use

Technical Information Glass Fibre Filler
Technical Information Glass Fibre Filler

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of November 17, 2015
This release replaces all eventually earlier issued versions.

NIEUWS

Vorig jaar vond de opening van ons Experience Center in Wolvega plaats. Deze nieuwe locatie aan de overkant van het hoofdkantoor in Nederland is de...

Meer lezen

IDEEËN

Deze magische lantaarns zullen heel wat aandacht krijgen. Je vindt gelijkaardige decoraties die echte blikvangers worden met wat kleur op...

Meer lezen

Veroudering, weersinvloeden en andere invloeden kunnen ervoor zorgen dat de kunststof van de koplampen geleidelijk aan mat en onzuiver wordt. Met...

Meer lezen